期刊文献+

基于SA4828的三相交流信号源设计 被引量:3

Design of three-phase AC power based on SA4828
下载PDF
导出
摘要 针对某测试设备惯性组合测试电路板的测试需求,设计了一种频率和幅度可调的三相交流信号源。该信号源采用MITEL公司生产的SA4828作为三相正弦脉宽调制(SPWM)信号发生器,在研华公司生产的DIO模块USB4751的控制下,生成所需要的SPWM波形,再经过由MAX274设计组成的二阶有源滤波网络,即得到可作为系统激励的三相交流信号。该三相交流信号源输出的频率和电压值精确可调,电路结构简单,信号精度与稳定性高,经实验证明系统性能满足应用要求。 For the testing requirements of a test equipment inertial combination test circuit board,designs a three-phase AC signal source which frequency and amplitude adjustable.This signal source chooses MITEL's products SA4828 as a three-phase SPWM signal generator,and uses Advantech's DIO module USB4751 to control SA4828.Then the generated SPWM waveforms can be turned into the required three-phase AC signal after passing through a second-order active filter network constructed by MAX274.This signal source outputs variable frequency and voltage.Its circuit structure is simple;its signal precision and stability is high;and the system performance is proved to meet the application requirements by experiment.
机构地区 军械工程学院
出处 《电子测量技术》 2010年第4期4-6,11,共4页 Electronic Measurement Technology
关键词 三相交流信号 SA4828 SPWM DIO three-phase AC signal SA4828 SPWM DIO
  • 相关文献

参考文献9

二级参考文献25

共引文献24

同被引文献22

引证文献3

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部