期刊文献+

混凝与气浮结合处理制革废水的实践 被引量:1

Coagulation and Flotation with the Practice of Tannery Wastewater Treatment
下载PDF
导出
摘要 近年来随着制革工业的发展,制革废水的排放造成了严重的水体污染,同时废水中含有的有毒有害物质对人体健康也产生了极大的威胁。如何有效降低废水中的有毒有害物质十分必要。实践证明:在生化处理前采用混凝沉淀+气浮工艺进行脱硫和除铬,去除率达98%,CODCr的去除率达到75%,BOD5去除率达到60%,大大降低后续处理的负荷,最终出水达到地方排放标准。 In recent years, with the leather industry, Tannery waste water resulted in serious water pollution, At the same time the toxic waste water containing hazardous substances on human health also had a great threat. How to effectively reduce the toxic and harmful substances in waste water is necessary. Practice has proved that: In the bio-chemical treatment before the use of coagulation and sedimentation + flotation process for desulfurization and in addition to chromium, Removal rate reached 98 %, CODcr removal rate reached 75 %, BOD5 removal efficiency reached 60 %, The follow-up treatment significantly reduced the load. The final effluent meet local discharge standards.
作者 吴毅
出处 《广东化工》 CAS 2010年第5期180-181,共2页 Guangdong Chemical Industry
关键词 制革废水 混凝沉淀 气浮 tannerywastewater coagulating sedimentation flotation
  • 相关文献

参考文献3

  • 1国家环保部分《水和废水监测分析方法》编委会.水和废水监测分析方法(第三版)[M].北京:中国环境科学出版社,1997.
  • 2李东旭,杨云.废水处理技术及工程应用,制革废水处理[M].北京:机械工业出版社,2003.
  • 3吴浩汀,王大长.氧化沟工艺处理制革废水实例[J].中国皮革,2001,30(7):20-21. 被引量:24

共引文献25

同被引文献1

  • 1高忠柏.制革工业废水处理[M].北京:化学工业出版社,2002.57-149.

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部