期刊文献+

高吸水性树脂发泡材料吸附盐溶液性能研究 被引量:2

The absorption properties of super absorbent polymers-foam material to salt solution
下载PDF
导出
摘要 研究了高吸水性树脂发泡材料对无机盐溶液的吸收倍率及吸液后的状态。通过3种不同密度的高吸水性树脂发泡材料在相同浓度的无机盐溶液中吸收无机盐溶液倍率、吸收后残液含固物状态及在不同浓度的溶液里树脂硬化情况实验研究,获得了高吸水性材料吸收盐分后一些重要的物理性能,为进一步研究布基-塑料混生复合防火材料提供参考。 The absorption rate of super absorbent polymers-foam material to salt solution and the state after absorption of super water-absorbent resin were studied. Several marked properties, the absorption rate to salt solution, the solid content of the residues after absorption and harden performance were analysed by using the method that three kinds of super absorbent polymers-foam material with different density absorpt were put in the same solution concentration. Some important physical properties of the material in the inorganic salt solution were found, which offered us further reference for future study on fireproof material of fabric substrate for plastic mixed high foaming composite material.
出处 《国际纺织导报》 2010年第4期51-52,54,共3页 Melliand China
关键词 高吸水性树脂 无机盐 溶液 发泡材料 吸收倍率 三维整体夹芯织物 防火材料 super water-absorbent resin, inorganic salt, solution, absorption rate, foam materials, 3D integrated andsandwiched fabric, fireproof material
  • 相关文献

参考文献2

二级参考文献10

  • 1J Quinn, R McIlhagger, A T McIlhagger. A modified system for design and analysis of 3D woven preforms[J].Composites: Part A, 2003 (34): 503~509.
  • 2A P Mouritza, M K Bannisterb, P J Falzon, et al.Review of applications for advanced three-dimensional fibre textile composites[J]. Composites: Part A,1999( 30 ):1445~1461.
  • 3Shen Chou, Hong-Chu Chen, Chorng-Cherng Wu. BMI resin composites reinforced with 3D carbon-fibre fabrics[J].Composites Science and Technology, 1992,43(2):117~128.
  • 4Brian N Cox, Mahyar S Dadkhah, W L Morris. On the tensile failure of 3D woven composites[J].Composites Part A: Applied Science and Manufacturing, 1996,27(6):447~458.
  • 5Mouritz AP, Baini C, Herszberg I. Mode I interlaminar fracture, toughness properties of advancedtextile fibreglass composites[J].Composites Part A:Applied Science and Manufacturing, 1999,30(7):859~870.
  • 6Muller J, Zulliger A, Dorn M. Economic production of composite, beams with 3D fabric tapes[J].Textile Month 1994, (9):9~13.
  • 7Guess TR, Reedy ED. Comparison of interlock fabric and laminated fabric Kevlar 49/epoxy composites[J].Journal of Composites Technology and Research, 1985 (7):136~142.
  • 8Callus PJ, Mouritz AP, Bannister MK, et al .Tensile properties and failure mechanisms of 3D woven GRP composites[J]. Composites A, 1999,30(11);1277~1287.
  • 9Karssson KF, Astrom BT. Manufacturing and application of structural sandwich components[J].Compos Part A: Appl Sci Manufact, 1997,28:97~111.
  • 10M.K. Bannister, R. Braemar, P.J. Crothers. The mechanical performance of 3D woven sandwich composites[J].Composite Structures, 1999 (47): 687~690.

共引文献23

同被引文献20

引证文献2

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部