摘要
采集制备了9个铁矿石标准物质,全铁含量为20.17%~66.87%,涵盖了贫铁矿至铁精矿粉,能满足铁矿勘查和选冶的需要。采用精度相对较高的测试方法进行均匀性检验,结果表明样品均匀性良好。选择13家具有丰富经验的实验室采用不同原理的方法进行定值测试,定值项目14种,其中13种组分提供标准值,H2O+提供参考值。
Nine standard reference iron ore samples of GFe-1~GFe-9 were developed.The concentrations of TFe of the samples ranged from 20.17% to 66.87%,which covered a wide iron concentration range from concentrated iron ore powder to poor iron ores and can meet the needs for iron ore exploration and ore-dressing.Powder XRF technique was used for homogeneity test and the analytical results indicated that all elements tested were in good homogeneity.A multi-laboratory collaborative analysis scheme was adopted in the certification procedure and thirteen accredited laboratories participated in the certification.13 elements were certified and H2O+ data were provided as a reference value.
出处
《岩矿测试》
CAS
CSCD
北大核心
2010年第3期305-308,共4页
Rock and Mineral Analysis
基金
中国地质调查局铁矿石与铬铁矿石标准物质研制项目资助(121201660902)
关键词
铁矿石
标准物质
标准值
不确定度
iron ore
reference material
certified value
uncertainty