期刊文献+

Preparation and electrochemical properties of Co_3O_4/graphite composites as anodes of lithium ion batteries

Preparation and electrochemical properties of Co_3O_4/graphite composites as anodes of lithium ion batteries
下载PDF
导出
摘要 Co_3O_4/graphite composites were synthesized by precipitation of cobalt oxalate on the surface of graphite and pyrolysis of the precipitate, and the effects of graphite content and calcination temperature on the electrochemical properties of the composites were investigated. The samples were characterized by thermogravimetry and differential thermal analysis (TG/DTA), X-ray diffractometry (XRD), scanning electron microscopy (SEM), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and charge/discharge measurements. With increasing the graphite content, the reversible capacity of the Co_3O_4/graphite composites decreases, while cycling stability improves dramatically, and the addition of graphite obviously decreases the average potential of lithium intercalation/deintercalation. The reversible capacity of the composites with 50% graphite rises from 583 to 725 mA·h/g as the calcination temperature increases from 300 to 500 ℃, and the Co_3O_4/graphite composites synthesized at 400 ℃ show the best cycling stability without capacity loss in the initial 20 cycles. The CV profile of the composite presents two couples of redox peaks, corresponding to the lithium intercalaction/deintercalation for graphite and Co_3O_4, respectively. EIS studies indicate that the electrochemical impedance decreases with increasing the graphite content. Co3O4/graphite composites were synthesized by precipitation of cobalt oxalate on the surface of graphite and pyrolysis of the precipitate, and the effects of graphite content and calcination temperature on the electrochemical properties of the composites were investigated. The samples were characterized by thermogravimetry and differential thermal analysis (TG/DTA), X-ray diffractometry (XRD), scanning electron microscopy (SEM), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and charge/discharge measurements. With increasing the graphite content, the reversible capacity of the Co3O4/graphite composites decreases, while cycling stability improves dramatically, and the addition of graphite obviously decreases the average potential of lithium intercalation/deintercalation. The reversible capacity of the composites with 50% graphite rises from 583 to 725 mA-h/g as the calcination temperature increases from 300 to 500 ℃, and the Co304/graphite composites synthesized at 400 ℃ show the best cycling stability without capacity loss in the initial 20 cycles. peaks, corresponding to the lithium intercalaction/deintercalation for The CV profile of the composite presents two couples of redox graphite and Co3O4, respectively. EIS studies indicate that the electrochemical impedance decreases with increasing the graphite content.
出处 《Journal of Central South University》 SCIE EI CAS 2010年第3期498-503,共6页 中南大学学报(英文版)
基金 Project(2007CB613607) supported by the National Basic Research Program of China Projects(2009FJ1002, 2009CK3062) supported by the Science and Technology Program of Hunan Province, China
关键词 锂离子电池 电化学性能 负极材料 电化学阻抗谱 石墨含量 扫描电子显微镜 复合材料 循环稳定性 composite materials cobalt oxides lithium ion batteries graphite electrochemical properties precipitation
  • 相关文献

参考文献16

  • 1POIZOT P,LARUELLE S,GRUGEON S,DUPONT L,TARASCON J M.Nano-sized transition-metal oxides as negativeelectrode materials for lithium-ion batteries[J].Nature,2000,407:496-499.
  • 2何则强,熊利芝,刘文萍,吴显明,陈上,黄可龙.Synthesis and electrochemical properties of SnO_2-polyaniline composite[J].Journal of Central South University of Technology,2008,15(2):214-217. 被引量:1
  • 3JCIM S S,IKUTA H,WAKIHARA M.Synthesis and characterization of Mn V2O6 as a high capacity anode material for a lithium secondary battery[J].Solid State Ionics,2001,139:57-65.
  • 4NULI Y N,ZHAO S L,QIN Q Z.Nanocrystalline tin oxides and nickel oxide film anodes for Li-ion batteries[J].Journal of Power Sources,2003,114:113-120.
  • 5BELLIARD F,IRVINE T S.Electrochemical performance of ball-milled ZnO-SnO2 systems as anodes in lithium-ion battery[J].Journal of Power Sources,2001,97/98:219-222.
  • 6WANG G X,CHEN Y,KONSTANTINOV K,YAO J,AHN J H,LIU H K,DOU S X.Nanosize cobalt oxides as anode materials for lithium-ion batteries[J].Journal of Alloys and Compounds,2002,340:L5-L10.
  • 7WANG G X,CHEN Y,KONSTANTINOV K,LINDSAY M,LIU H K,DOU S X.Investigation of cobalt oxides as anode materials for Li-ion batteries[J].Journal of Power Sources,2002,109:142-147.
  • 8BAHLAWANE N,RIVERA E F,KOHSE-HOINGHAUS K,BRECHLING A,KLEINEBERG U.Characterization and tests of planar Co3O4 model catalysts prepared by chemical vapor deposition[J].Appl Catal B:Environmental,2004,53(4):245-255.
  • 9OH S W,BANG H J,BAE Y C,SUN Y K.Effect of calcination temperature on morphology,crystallinity and electrochemical properties of nano-crystalline metal oxides (Co3O4,CuO,and NiO) prepared via ultrasonic spray pyrolysis[J].Journal of Power Sources,2007,173:502-509.
  • 10LIU Y,MI C,SU L,ZHANG X.Hydrothermal synthesis of Co3O4 microspheres as anode material for lithium-ion batteries[J].Electrochimica Acta,2008,53:2507-2513.

二级参考文献18

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部