期刊文献+

反应烧结制备Ti_2AlN-TiN复合材料 被引量:4

Fabrication of Ti_2AlN-TiN composite by reaction sintering
下载PDF
导出
摘要 采用2Ti/2Al/3TiN粉体为原料,通过反应热压烧结,以制备Ti2AlN-TiN复合材料。采用X射线衍射(XRD)、场发射扫描电镜(FE-SEM)结合能谱仪(EDS)分析试样。研究结果表明,在1350℃保温2h,压力为30MPa,可烧结得到组织细小、致密的Ti2AlN-TiN复合材料。材料中层片状Ti2AlN晶粒长约5m,TiN晶粒大小为1~2m。复合材料具有良好的机械性能,其显微硬度与弯曲强度分别达8.57GPa和450MPa。 2Ti/2Al/3TiN mixed powders are used as the starting materials for the fabrication of Ti2AlN-TiN composite by reaction hot pressing.The sample is analyzed by XRD and FE-SEM combined with EDS.The result shows that dense Ti2AlN-TiN composite with fine organization is produced by hot pressing at 1 350 ℃ for 2 h,the pressure of 30 MPa.Ti2AlN plate grains are about 5 m in length,TiN was 1-2 m.The composite possess good mechanical properties,which microhardness is 8.57 GPa and bending strength is 450 MPa.
出处 《燕山大学学报》 CAS 2010年第3期204-206,共3页 Journal of Yanshan University
基金 燕山大学优秀博士生科学基金资助项目(YSU200902)
关键词 Ti2AlN TIN 反应烧结 Ti2AlN TiN reaction sintering
  • 相关文献

参考文献10

  • 1Barsoum M W, Ali M, El-Raghy T. Processing and characterization of Ti2AlC, Ti3AlN and Ti2AlC0.5N0.5 [J]. Metallurgical and Materials Transactions A, 2000,31 (7): 1857-1865.
  • 2Barsoum M W. The Mn+1AXn phases: a new class of solids, thermodynamically stable nanolaminates [J]. Progress in Solid State Chemistry, 2000,28 (1/4): 201-281.
  • 3Barsoum M W, El-Raghy T. The MAX phases: Unique new carbide and nitride materials [J]. American Scientist, 2001,89 (4): 336-345.
  • 4Hug G. X-ray absorption spectroscopy, EELS, and full-potential augmented plane wave study of the electronic structure of Ti2AlC, Ti2AlN, Nb2AlC, and (Ti0.5Nb0.5)2AlC [J]. Physical Review B, 2005,71 (2): 024105.
  • 5Hogberga H, Hultmana L, Emmerlich J, et al.. Growth and characterization of MAX-phase thin films [J]. Surface and Coatings Technology, 2005,193 (1/3): 6-10.
  • 6Beckers M, Schell N, Martins R M S. Microstructure and nonbasalplane growth ofepitaxial Ti2AlN thin films [J]. Journal of Applied Physics, 2006,99 (3): 34902-34905.
  • 7Yan Ming, Chen Yan-lin, Mei Bing-chu. Synthesis of high-purity Ti2AlN ceramic by hot pressing [J]. Transactions of Nonferrous Metals Society&China, 2008,18 (1): 82-85.
  • 8田晨光,严明,梅炳初.三元层状氮化物(Ti_2AlN)陶瓷的研究[J].稀有金属快报,2006,25(6):6-9. 被引量:3
  • 9严明,梅炳初,朱教群,田晨光,王苹.块体Ti_2AlN多晶陶瓷的制备研究[J].武汉理工大学学报,2007,29(3):20-22. 被引量:7
  • 10Lin Z J, Zhuo M J, Li M S, et al.. Synthesis and microstructure of layered-ternary Ti2AlN ceramic [J]. Scripta Materialia, 2007,56 (12): 1115-1118.

二级参考文献12

  • 1Barsoum M W, All M. Processing and Characterization of Ti2AlC, Ti2AlN and Ti2AlC0.5 N0.5 [J]. Metallurgical and Materials Transactions A, 2000,31(7): 1857-1865.
  • 2Beckers M,Schell N, Martins RMS. Microstructure and Nonbasal-plane of Epitaxial Ti2AIN Thin Films[J]. Journal of Applied Physics, 2006,99 (2):34902-34905.
  • 3Joelsson T, Horling A, Birch J. Single-crystal Ti2AIN Thin Films[J]. Applied Physics Letters, 2005, 86(3): 111913-111915.
  • 4Barsoum M W, Brodkin D. Layered Machinable Ceramics for High Temperature Applications [J]. Scripta Metall Mater,1997, 36 (5):535-541.
  • 5Jennifer L Jordan, Naresh N Thadhani. Effect of Shock-activation of Post-shock Reaction Synthesis of Ternary Ceramics[J].Shock Compression of Condensed Matter, 2001, 27(5):1097-1100.
  • 6Y. C. Zhou,X. H. Wang. Deformation of polycrystalline Ti2AlC under compression[J] 2001,Material Research Innovations(2):87~93
  • 7M. W. Barsoum,T. El-Raghy,M. Ali. Processing and characterization of Ti2AlC, Ti2AlN, and Ti2AlC0.5N0.5[J] 2000,Metallurgical and Materials Transactions A(7):1857~1865
  • 8M. W. Barsoum,T. El-Raghy,A. Procopio. Synthesis of Ti4AlN3 and phase equilibria in the Ti-Al-N system[J] 2000,Metallurgical and Materials Transactions A(2):373~378
  • 9朱教群,梅炳初,陈艳林.层状三元碳化物Ti_3SiC_2及其制备研究[J].武汉理工大学学报,2002,24(5):36-39. 被引量:20
  • 10周卫兵,梅炳初,朱教群,陈艳林.可加工Ti_2AlC陶瓷的研究进展[J].武汉理工大学学报,2002,24(9):22-24. 被引量:8

共引文献8

同被引文献25

引证文献4

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部