期刊文献+

钛基梯度功能材料电场激活原位合成 被引量:3

In-situ Synthesis of Functionally Graded Materials with Titanium Substrate by Field-Activated Synthesis Process
下载PDF
导出
摘要 本文采用电场激活压力辅助燃烧合成工艺(FAPAS),以Ti-Al和Ni-Ti-C体系的放热反应,实现了TiC陶瓷颗粒增强的Ni基复合材料的原位合成以及Ti-TiAl-(TiC)pNi功能梯度材料的同步连接制备。借助SEM和XRD等手段分析了各层界面的相组成和微观结构以及界面元素扩散特征,探讨了电场对功能梯度材料制备过程中各层间界面的冶金特征及连接结构的影响,揭示了电场作用下,利用放热体系进行原位合成和扩散连接的机制。研究结果表明,外加电场条件下,钛粉和铝粉反应形成TiAl相产生的化学热促进了钛基板与TiAl层界面原子的扩散溶解,是两者形成连接的关键;钛-碳反应热促进TiC/Ni细晶复合结构形成,提高了TiC颗粒与基体之间的润湿性和复合材料层的致密度。 In-situ synthesis and diffusion bonding of functionally graded material(FGM)Ti-TiAl-(TiC)pNi samples prepared by field-activated pressure-assisted synthesis process(FAPAS)were investigated and the reactions of Ni+Ti+C and Ti+Al were introduced as exothermal reaction systems.The microstructure,phase composition and elements concentration profiles across the interfaces between layers were characterized by scanning electron microscopy(SEM),X-ray diffractometry(XRD)and other measures.The mechanism of in-situ synthesis and diffusion bonding under electric field were discovered by analyzing the metallurgical process and bonding structures of layers.It is indicated that the reaction between Ti and Al is the key factor for the boding of Ti substrate and TiAl intermetallic compound layer due to the heat produced by the reaction.The reaction of Ti and C facilitates the forming of composite of TiC/Ni with fine structure and increases its densification by improving the wetting ability between Ni and TiC under the action of the field.
出处 《材料科学与工程学报》 CAS CSCD 北大核心 2010年第3期335-340,共6页 Journal of Materials Science and Engineering
基金 国家自然基金资助项目(50975190) 山西省归国留学人员基金资助项目(200826)
关键词 电场激活 功能梯度材料 原位合成 TIAL (TiC)pNi 扩散连接 field-activated functionally graded materials(FGMs) in-situ synthesis TiAl (TiC)PNi diffusion bonding
  • 引文网络
  • 相关文献

参考文献10

  • 1张国兵,郭全贵,赵娟,刘朗,史景利,翟更太.热压烧结SiC/C功能梯度材料微观结构及热震性能研究[J].材料科学与工程学报,2007,25(1):9-13. 被引量:4
  • 2A Kawasaki, R. Watanabe. Thermal fracture behavior of metal/ ceramic functionally graded materials[J]. Engineering Fracture Mechanics, 2002, 69 : 1713-1728.
  • 3黎文献,张刚,赖延清,田忠良,秦庆伟.梯度功能材料的研究现状与展望[J].材料导报,2003,17(F09):222-225. 被引量:19
  • 4艾桃桃,王芬,朱建锋.Al_2O_3/TiAl复合材料的原位合成及反应机制的研究[J].金属热处理,2007,32(4):38-42. 被引量:14
  • 5S. P. Chen, Q. S. Meng, J.F. Zhao, Z.A. Munir. Titanium diboride - nickel graded materials prepared by field-activated, pressure-assisted synthesis process[J]. Journal of Materials Science, 2009. 44(4) :1121-1126.
  • 6Q. S. Meng, S.P. Chen, Q.L. Wang, Z. A. Munir (TiB2) pNi/Ni3Al/Metals Graded Materials Prepared by the Field- Activated and Pressure-Assisted Combustion Process [J]. Advanced Materials Research, 2009, 66: 194- 197.
  • 7Asoka-Kumar P, O' brien K, Lynn KG, et al. Detection of current-induced vacancies in thin aluminum copper lines using positrons[J]. Appl Phys Lett, 1996, 68(3):406.
  • 8Garay J, Glade SC, Anselmi-Tamburini U, Asoka-Kumar P, Munir ZA. Electric current enhanced defect mobility in Ni3Ti intermetallics[J]. Appl Phys Lett. , 2004, 85(4) :573-575.
  • 9刘晓涛,崔建忠,曲涛.在电场中奥氏体化对低碳钢显微组织及淬透性的影响[J].钢铁研究学报,2004,16(4):46-49. 被引量:2
  • 10William F. Smith. Foundation of materials science and engineering [M]. China Machine Press, 2006.

二级参考文献44

共引文献35

同被引文献31

引证文献3

二级引证文献11

;
使用帮助 返回顶部