期刊文献+

黄铜件镀硬铬后的氢脆现象 被引量:3

Hydrogen Embrittlement of Brass Article after Hard Chrome Plating
下载PDF
导出
摘要 通过试验验证了黄铜件镀硬铬后发生断裂与基体材料无关,而是由于镀铬过程中析氢使铬镀层产生氢脆导致黄铜件镀硬铬后冲击试验失败。镀铬后在200-220℃条件下,除氢处理3h可降低脆性得到结合力良好,低氢脆的硬铬层。
作者 赵予川
出处 《电镀与精饰》 CAS 北大核心 2010年第6期31-32,共2页 Plating & Finishing
关键词 氢脆 铜件 镀硬铬
  • 相关文献

同被引文献25

  • 1王华,曾振欧,胡耀红,陈力格.Ti基DSA阳极在三价铬硫酸盐镀液中的电化学行为[J].材料保护,2007,40(4):1-3. 被引量:11
  • 2Dennis W. Method for purification of trivalent chromium electroplating baths, US :5178746 [ P]. 1993 - 12-01.
  • 3Ibrahim S K, Gawne D T, Watson A. Corrsion and Wear Resistance of Thick Chromium Deposites from Accelerated Cr(Ⅲ) Electrolytes [ J ]. Trans IMF, 1998, 76 (4) : 156 - 161.
  • 4Zeng Z, Wang L, Liang A, et al. Tribological and electrochemical behavior of thick Cr-C alloy coatings electrodeposited in trivalent chromium bath as an alternative to conventional Cr coatings [ J ]. Electrochim Acta, 2006,52 : 1 366.
  • 5Ghaziof S, Golozar M A, Raeissi K. Characterization of asdeposited and annealed Cr-C alloy coatings produced from a trivalent chromium bath[ J]. Journal of Alloys and Compounds, 2010,496 : 164 - 168.
  • 6Kwon S C, Kim M, Park S U, et al. Characterization of intermediate Cr- C layer fabricated by electrodeposition in hexavalent and trivalent chromium baths [ J ]. Surface and Coatings Technology, 2004, 183 : 151 - 156.
  • 7Michaelsen C, Gente C, Bormann R. Phase formation and thermodynamics of unstable Cu - Cr alloys [ J ]. J Mater Res,1997,12(6) :1 463 - 1 467.
  • 8赵玲艳.锂离子电池用铜箔的应用与发展现状[J].有色金属加工,2008,37(1):8-10. 被引量:12
  • 9郭崇武,易胜飞.三价铬镀液中铜杂质的分析[J].电镀与精饰,2008,30(6):34-36. 被引量:13
  • 10刘卫青,张长鑫,杜登学,孙晋伟,翁国庆.日本三价铬电镀技术的发展状况[J].材料保护,2008,41(10):47-50. 被引量:12

引证文献3

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部