期刊文献+

硅氧烷低聚物改性EP固化机理及表面性能研究 被引量:1

Surface properties and curing mechanism of epoxy resin/siloxane-terminated organic oligomers composite systems
下载PDF
导出
摘要 为改善EP的表面性能,利用合成的星型端硅氧烷低聚物(TPSi)对环氧树脂(EP)改性,通过溶胶-凝胶技术固化复合体系.研究了复合体系的固化机理及表面性能.结果表明:TPSi改性EP的复合体系中,存在着3种固化机理.当TPSi含量不超过30%时,3种不同机理固化反应的发生导致体系的相容性增加.与EP-胺固化样相比,改性后试样的临界表面张力增加.偶联剂(KBE-9103)的加入,TPSi改性固化体系表面张力增大. (Epoxy resin) EP was modified with star siloxane-terminated oligomers(TPSi) in order to improve surface properties of epoxy resin.The modified systems were cured with amino curing agent via amino-glycidyl reaction and sol-gel technology.The surface properties and curing mechanism of composite systems with new star siloxane-terminated oligomers were investigated in this passage.It was showed that the composite systems had three different curing mechanisms.The compatibilities of composite systems increased when TPSi was less than 30% in the composite systems.The critical surface intension of composite systems was increased compared with EP-amino curing sample.The critical surface intension of composite systems were improved when KBE-9103 were added in the samples.
出处 《湖北大学学报(自然科学版)》 CAS 北大核心 2010年第2期202-205,共4页 Journal of Hubei University:Natural Science
基金 广西柳州市高新开发区项目(2007010109)资助
关键词 环氧树脂 星型端硅氧烷低聚物 固化机理 表面性能 epoxy resin siloxane-terminated oligomers curing mechanism surface property
  • 相关文献

参考文献10

  • 1Chen J X, Mark D S. Photoinitiated cationic polymerization of cycloaliphatic epoxide with siloxane or alkoxysilane functionalized polyol coatings[J]. European Polymer Journal, 2003,39 : 505-520.
  • 2Rhee S H. Effect of molecular weight of poly((-caprolactone) on interpenetrating network structure apatite-forming ability and degradability of poty((-caprolactone)/silica nano-hybrid materials[J]. Biomaterials, 2003,24:1721-1727.
  • 3Rhee S H, Lee Y K, Lim B S. Evaluation of a novel poly(ε-caprolactone)-organosiloxane hybrid material for the potentian application as a bioaetive and degradable bone substitute[J]. Biomaeromoleeules, 2004,5:1575-1579.
  • 4Rhee S H. Bonelike apatite-forming ability and mechanical properties of poly(ε-caprolactone)/silica hybrid as a function of poly(ε-caprolactone) content[J]. Biomaterials, 2004,25 : 1167-1175.
  • 5Liu P G, He L H, Ding H Y, et al. Silyl-crosslinked urethane elastomer modifying epoxy resin.. I. Morphological studies[J]. Journal Polymer Research, 2005,2(12) : 139-148.
  • 6Tiwari A, Sugamoto R, Hihara L H. Analysis of molecular morphology and permeation behavior of polyimide siloxane molecular composites for their possible coatings application[J]. Progress in Organic Coatings, 2006,57 : 259-272.
  • 7Sun F,Jiang S L. Synthesis and characterization of photosensitive polysiloxane[J]. Nuclear Instruments and Methods in Physics Research B, 2007,254 : 125-130.
  • 8唐忠锋,刘平桂,赫丽华,梁兴泉,林宝凤.端硅氧烷基低聚物/环氧树脂复合体系的耐酸碱性能研究[J].材料工程,2005,33(7):47-50. 被引量:10
  • 9顾锡人.表面化学[M].北京:科学出版社,1994.20-33.
  • 10唐忠锋,刘平桂.端硅氧烷基低聚物改性环氧树脂的形态研究[J].塑料,2009,38(2):92-94. 被引量:5

二级参考文献19

  • 1唐忠锋,刘平桂,赫丽华,梁兴泉,林宝凤.端硅氧烷基低聚物/环氧树脂复合体系的耐酸碱性能研究[J].材料工程,2005,33(7):47-50. 被引量:10
  • 2管云林,郭锦棠,邵蕾,姚康德.聚氨酯/环氧树脂互穿网络聚合物相行为与断裂拉伸强度[J].材料研究学报,1996,10(3):313-318. 被引量:7
  • 3龚兵,李玲,董凤云.透明尼龙/环氧树脂/TiO_2复合材料熔体流变性能研究[J].塑料,2007,36(1):77-80. 被引量:3
  • 4YEE A F, PEARSON R A. Toughening mechanism in elastomer-modified epoxies I mechanical studies[J]. J Mater Sci, 1986, 21: 2462-2474.
  • 5KINLOCH A J, SHAW S J, HUNSTON D L. Deformation and fracture behaviour of rubber toughened epoxy 2 failure criteria[J]. Polymer, 1983, 32: 1341-1344.
  • 6OKAMATSU T, KIFAJIMA M, HANAZAWA H, et al. Effect of phase structure on the adhesion properties of the dimethoxysilyl-terminated polypropylene oxide/epoxy resin system[J]. J Adhesion Sci Technol, 1999, 13(1): 109-125.
  • 7KAR S, BANTHIA A. Use of acrylate-based liquid rubbers as toughening agents and adhesive property modifiers of epoxy resin[J]. J Appl Polym Sci, 2004, 92: 3814-3821.
  • 8RATNA D, SIMON GP. Mechanical characterization and morphology of carboxyl randomized poly(2-ethylhexylacrylaple) liquid rubber toughened epoxy resins[J]. Polymer, 2001, 42(18): 7739-7747.
  • 9HSIEH K H, HAN J L. Graft interpenetrating polymer networks of polyurethane epoxy I Mechanical behaviour[J]. J Polym Sci B, 1990, 28: 783-794.
  • 10BHUNIYA S, ADHIKARI B. Toughening of epoxy resins by hydroxyl-terminated silicon modified polyurethane oligomers[J]. J Appl Polym Sci, 2003, 90: 1497-1506.

共引文献16

同被引文献382

引证文献1

二级引证文献14

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部