期刊文献+

基于声-超声技术的钢丝绳强度检测方法的研究 被引量:4

Examination method research of steel wire intensity based on the acoustic-ultrasonic technology
下载PDF
导出
摘要 简述了钢丝绳检测目前存在的一些问题,介绍了声-超声检测的发展及现状,提出了基于声-超声检测技术和拉断试验来推断钢丝绳破断拉力的方法,着重介绍其系统、原理及检测方法。 The questions existences at present steel wire examination are summarized.The Acous-tic-Ultrasonic examination's development and the present situation is introduced.The method of the steel wire breaking force is inferred base on the Acoustic-Ultrasonic examination technology and the abruption experiment.It focused on its system,the principle and the examination method.
出处 《机械设计与制造》 北大核心 2010年第7期104-105,共2页 Machinery Design & Manufacture
基金 湖南省自然科学基金(07JJ6099) 湖南科技大学研究生创新基金(S080105)
关键词 钢丝绳 声-超声检测 强度检测 应力波因子 Wire rope Acoustic-Ultrasonic testing Strength testing Stress-Wave factor
  • 相关文献

参考文献3

  • 1Oh-Yang Kwon,Tae-Hyun Kim,Kyung-Joo Lee. Monitoring of Fatigue Damage in Adhesively Bonded Composite-Metal Joints by Acoustic Methods,Roma,2000(15).
  • 2Richard D. Finlayson. Health Monitoring of Aerospace Structures with Acoustic Emission and Acousto- Ultrasonics, Roma,2000(15 ).
  • 3Daniel C Betz,Graham Thursby,Brian Culshaw. Acousto-ultrasonie sensing using fiber Bragg gratings,Daniel C Betz et al 2003,Smart Mater. Struet, 2002(12): 122-128.

同被引文献20

  • 1陈振华,史耀武,焦标强,赵海燕.薄镀锌钢板点焊超声谐振检测[J].焊接学报,2008,29(4):101-104. 被引量:7
  • 2徐书根,王威强,赵培征,宋明大.磁致伸缩导波技术检测管道缺陷[J].无损检测,2008,30(7):434-437. 被引量:13
  • 3曹印妮,张东来,徐殿国.钢丝绳定量无损检测现状[J].无损检测,2005,27(2):91-95. 被引量:26
  • 4裴俊峰,邓明晰,胡庆林.铝合金板材相对均匀性的声-超声评价研究[J].后勤工程学院学报,2006,22(4):98-101. 被引量:2
  • 5WUNG E A force based failure criterion for spot weld design[J]. Experimental Mechanics, 2001, 41. 107-113.
  • 6LONG Xin, SANJEEV K. Fatigue properties and failure characterization of spot welded high strength steel sheet[J]. International Journal of Fatigue, 2007, 29(5): 879-886.
  • 7KAUTZ H E, LERCH B A. Preliminary investigation of acoustic-ultrasonic evaluation of metal matrix composite specimens[J]. Materials Evaluation, 1991, 49(5): 607-612.
  • 8TUA P S, QUEK S T, WANG Q. Detection of cracks in plates using piezo-actuated Lamb waves[J]. Smart Materials and Structures, 2004, 13. 643-660.
  • 9HAYASHI T, KAWASHIMA K. Mode extraction from multi-modes of Lamb waves[J]. Review of Progress in Quantitative NDE, 2002, 21: 219-224.
  • 10CHO Y, ROSE J L. An elastodynamic hybrid boundary element study for elastic guided wave interactions with a surface breaking defect[J]. International Journal of Solids and Structures, 2000, 37: 4103-4124.

引证文献4

二级引证文献16

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部