AutoCAD绘图软件立体图形转平面视图的方法

AutoCAD Mapping Software to Print Three-dimensional Graphical View of the Method of Plane

重点解决AutoCAD软件立体图转换成平面视图的方法。基本原理是绘制俯视图实体,并以此为中心,综合应用复制、三维旋转、俯视图投影、轮廓、图层等命令,将6个基本视图在水平面上投影生成。主要步骤:首先绘制一个俯视图实体,然后在其他5个基本视图的位置分别复制该实体并旋转适当角度,再利用俯视图投影的原理在水平面上生成各个平面视图,最后通过将实体转换成轮廓和修改相关图层参数设置达到虚线、实线的正确显示。

This article focused on solving the AutoCAD software into three-dimensional map view of the method of plane.The basic principles are：Vertical view drawing entities as the Center,the comprehensive application of copy,three-dimensional rotation,vertical view projection,contours,layers,such as orders,will be six basic view generated in the horizontal plane projection.The main steps：First of all entities drawn a vertical view,and then in the other five,respectively,the location of the basic view a copy of the entity and the appropriate rotation angle,and then use the principle of vertical view in the horizontal projection plane to generate the various plane view,and finally converted by the outline of entities and amend the relevant layer parameter setting to achieve dotted line,solid line shows the correct.