期刊文献+

电刷镀镍及镍磷非晶态合金镀层性能研究 被引量:3

A Study on the Properties of Ni and Ni P Amophous Brush Plating
下载PDF
导出
摘要 利用扫描电镜、能谱分析仪、MM-200型试验机及MicrometⅡ数显式显微硬度计对镀层的硬度、摩擦磨损性能及耐蚀性能进行了分析测试,并研究了热处理对其组织结构及性能的影响,从而分析比较了各种镀层性能及差异,在此基础上为确定进口汽车缸套修复的最佳镀层提供了依据。 Hardness,wearability and corrosion resistance of the plating were measured and analyzed by means of SEM,spectrometer,MM-200 tester and micromet Ⅱ DD microscopic hardness tester. The effect of heat treatment on its texture and properties was also studied,thus properties and differences of various platings were analyzed and compared.As a result,basis is provided for determining optimum plating in repairing imported car cylinder packing.
出处 《电镀与环保》 CAS CSCD 北大核心 1999年第1期13-16,共4页 Electroplating & Pollution Control
关键词 电刷镀 镀层 镀镍 镀合金 电镀 Brush plating Nickel and its alloy Plating performance
  • 相关文献

同被引文献19

  • 1梁平.SiC微粒对Ni-P合金刷镀层表面形貌和结构的影响[J].表面技术,2005,34(1):22-24. 被引量:6
  • 2华希俊,陈嘉真.金属基-陶瓷电刷镀复合镀层高温摩擦磨损性能研究[J].中国机械工程,1995,6(2):51-53. 被引量:16
  • 3张天顺,张放.非晶态镍磷合金电刷镀研究[J].电镀与精饰,1996,18(3):32-34. 被引量:6
  • 4JEONG D H, GONZALEZ F, PALUMBO G, et al. The effect of grain size on the wear properties of electrodeposited nanocrystalline nickel coatings[J]. Scripta Materialia, 2001, 44 (3): 493-499.
  • 5FERKEL H, MULLER B, RIEHEMANN W. Electrodeposition of particle strengthened nickel films [J]. Materials Science and Engineering A, 1997, 234/236: 474-476.
  • 6DIAZ J A, PASSARELLI M, BERRIOS J A, et al. Fatigue behavior of a 4340 steel coated with an electroless Ni-P deposit [J]. Surface and Coatings Technology, 2002, 149(1): 45-56.
  • 7黄燕滨.[D].北京:装甲兵工程学院,1987.
  • 8O'REGAN S D, HABN G T, RUBIN C A. The driving force for model II crack growth under rolling contact [J]. Wear, 1985, 101: 333-346.
  • 9CLARKE R D. Dalic selective brush plating and anodising [J]. Adhesion & Adhesives, 1999, 19(2-3): 205-207.
  • 10DINI J W. Brush plating recent property data [J]. Metal Finishing, 1997, 95(6): 88-93.

引证文献3

二级引证文献8

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部