摘要
首先,基于PRO/E建立大功率拖拉机转向机构三维模型;然后,将模型导入动力学仿真软件ADAMS/View,建立虚拟样机模型;最后,分别进行ADAMS单独仿真和ADAMS/Control与MATLAB/simulink联合仿真。仿真结果表明,建立的模型和联合仿真的分析方法是有效的,为拖拉机转向机构的研究提供了一种新的手段。
The high-power tractor steering mechanism 3D model was built up with Pro/E software firstly,and then converted it into ADAMS/View to build the virtual prototype model,In the end,running independent simulation by ADAMS and Co-simulation by ADAMS/Control and MATLAB/simulink.The results showed that the model and the method of co-simulation is effective and it could be applied in the analysis of the tractor steering mechanism.
出处
《农机化研究》
北大核心
2010年第8期20-23,共4页
Journal of Agricultural Mechanization Research
基金
国家"十一五"科技支撑计划项目(2006BAD11A01)
