摘要
采用钛酸丁酯[Ti(OC_4H_9)_4]水解法制备了纳米TiO_2粉体,通过制备过程工艺参数的控制,获得了不同粒径和形貌的粉料.光反射谱研究表明,纳米TiO_2的吸收线系限与粉体的粒径和相结构密切相关;在30MPa和850℃进行热压烧结,得到了相对密度为93.3%,颗粒大小为200um左右的TiO_2块体.
Nano-titania was prepared by Ti(OC4Hg)4 hydrolysis precipition approach, its particle sizeand agglomeration can be controlled by adjusting some parameters of the process. Reflect spectrarevealed that the series limit of nano-titania was influenced by its particle size and crystal structureas well. Titania compact with a grain size about 200um and 93.3% relative density was obtainedvia hot-pressure sintering.
出处
《无机材料学报》
SCIE
EI
CAS
CSCD
北大核心
1999年第1期171-174,共4页
Journal of Inorganic Materials
关键词
反射谱
烧结
二氧化钛陶瓷
纳米粉体
nano-titania, reflect spectrum, series limit, hot-pressure sintering