摘要
基于无线GSM网络的智能型住宅自动控制系统主要是用于实现远程控制功能和远程报警功能,它通过手机编辑固定格式的信息发送给TC35i模块,单片机通过串口读取模块中的相应信息,分解后提取出控制功能信号,然后进行相应的家用电器控制。单片机随时检测传感器的动作变化,当传感器的某一路发生变化时,单片机会把相应的信息编辑成短信形式通过串口传送到TC35i模块,然后通过模块把信号传给手机。
The smarthome automatic control system based on GSM wireless network is used to implement remote control and remote alarm. In this system, mobile phone sends the messages edited as a standard format to the TC35i module, then single-chip microcontroller（SCM） reads the corresponding information in TC35i module through the serial port, picks up the control signal after process, and achieves the control for the appropriate appliance finally. In the meantime, SCM detects the sensors at any time. If any change of sensors is detected, the microcontroller could edit the appropriate information into text messages and sent to the TC35i module through the serial port. Then the messages can be sent to user＇s phone.
出处
《传感器世界》
2010年第7期21-25,共5页
Sensor World
