期刊文献+

空间网状LiFePO_4/C和Li_(1-x)FePO_4的制备与性能研究

Preparation and characterization of space meshed LiFePO_4/C and Li_(1-x)FePO_4
下载PDF
导出
摘要 以酸化的Li2CO3为锂源,由水热法制得了部分外貌呈三维空间网状的LiFePO4/C纳米颗粒,在0.5C放电倍率下的最高放电比容量为143.4mAh/g,经100次循环后无衰减。用化学脱锂法制备了Li1-xFePO4(x=0、0.3、0.5、0.8、1)。用XRD和交流阻抗法对Li1-xFePO4进行了表征。研究表明,随着锂离子的脱出,存在LiFePO4/FePO4两相可逆变化,正负极表面阻抗的变化趋势是先增大后减小。 LiFePO4/C particles whose partial appearance was three dimensional network structure was prepared by hydrothermal method with that acidified Li2CO3 as the lithium resource.Its highest specific capacity was 143.4mAh/g and no capacity lost was found after 100charge-discharge cycles at 0.5C.Li1-xFePO4 were prepared by chemically delithiated method.Li1-xFePO4 were characterized by XRD and EIS.Results show that,with the increasing extraction of Li+ from LiFePO4,XRD analysis of Li1-xFePO4 support the LiFePO4/FePO4 model.Surface resistance of cathode and anode increases at first and then decreases.
出处 《功能材料》 EI CAS CSCD 北大核心 2010年第7期1282-1285,共4页 Journal of Functional Materials
基金 青海省重点科技攻关资助项目(2006-G-168) 国家科技攻关计划滚动支持资助项目(2004BA602B-01)
关键词 锂离子电池 Li1-xFePO4 交流阻抗 锂离子扩散系数 lithium ion battery Li_(1-x)FePO_4 EIS lithium ion diffusion coefficient
  • 相关文献

参考文献22

  • 1Padhi A K, Nanjundaswamy K S, Ooodenough J B. [J]. J Electrochem Soc, 1997, 144(4) : A1188-A1194.
  • 2Kim J K, Cheruvally G, Choi J W. [J]. J Power Sources, 2007, 166(1): 211-218.
  • 3Padhi A K, Nanjundaswamy K S, Masquelier C, et al. [J]. J Electroehem Soe, 1997, 144(5): 1609-1613.
  • 4Michael T. [J]. Nature Materials, 2002, 1: 81-82.
  • 5Kang H C, Jun D K, Jin B, et al. [J]. J Power Sources, 2008, 179(1): 340-346.
  • 6Wang D Y, Li H, Wang Z X, et al. [J]. J Solid State Chem, 2004, 177(12): 4582-4587.
  • 7Barker J. Lithium-based Active Materials and Preparation Thereof[P]. US Patent, 7438992. 2008.
  • 8Yu F, Zhang J J, Yang Y F, et al. [J]. Electrochimica Acta, 2009, 54(28): 7389-7395.
  • 9钟美娥,周志晖,周震涛.固相-碳热还原法制备高密度LiFePO_4/C复合材料及其电化学性能[J].物理化学学报,2009,25(8):1504-1510. 被引量:5
  • 10Higuchi M, Katayama, Azuma K Y, et al. [J]. J Power Sources, 2003, 119-121: 258-261.

二级参考文献26

  • 1Jiang, J.; Dahn, J. R. Electrochem. Commun., 2004, 6:724.
  • 2Jiang, J.; Dahn, J. R. Electrochem. Commun., 2004, 6:39.
  • 3Zaghib, K.; Ravet, N.; Gauthier, M.; Gendron, F.; Mauger, A.; Goodenough, J. B.; Julien, C. M. J. Power Sources, 2006, 163:560.
  • 4Xie, H.; Zhou, Z. T. Electrochim. Acta, 2006, 51:2063.
  • 5Padhi, A. K.; Nanjundaswamy, K. S.; Goodenough, J. B. J. Electrochem. Soc., 1997, 144:1188.
  • 6Myung, S. T.; Komaba, S.; Hirosaki, N.; Yashiro, H.; Kumagai, N. Electrochim. Acta, 2004, 49:4213.
  • 7Zane, D.; Carewska, M.; Scaccia, S.; Cardellini, F.; Prosini, P. P.Electrochim. Acta, 2004, 49:4259.
  • 8Wang, L. N.; Zhan, X. C.; Zhang, Z. G.; Zhang, K. L. J. Alloys Compd., 2008, 456:461.
  • 9Huang, H.; Yin, S. C.; Nazar, L. F. Electrochem. Solid-State Lett., 2001, 4:A170.
  • 10Park, K. S.; Son, J. T.; Chung, H. T.; Kim, S. J.; Lee, C. H.; Kang, K. T.; Kim, H. G. Solid State Commun., 2004, 129:311.

共引文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部