期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

Evaluation of stress intensity factors of thin AZ31B magnesium alloy plate under biaxial tensile loading

Evaluation of stress intensity factors of thin AZ31B magnesium alloy plate under biaxial tensile loading
下载PDF
导出
摘要 Stress intensity factors of thin AZ31B magnesium alloy sheet under biaxial tension loading were analyzed by modified Dugdale model. K-values with crack angle of 90° obviously show that there is no influence of the loading condition in Mode-I. In the 45° case, K1 values are obtained within 10% errors when they are calculated by modified Dugdale model under biaxial loading. It is concluded that the modified Dugdale model is one of effective ways to evaluate stress intensity factor of AZ31 magnesium alloy sheet appropriately. Stress intensity factors of thin AZ31B magnesium alloy sheet under biaxial tension loading were analyzed by modified Dugdale model.K-values with crack angle of 90°obviously show that there is no influence of the loading condition in Mode-I.In the 45°case,K Ⅰ values are obtained within 10%errors when they are calculated by modified Dugdale model under biaxial loading.It is concluded that the modified Dugdale model is one of effective ways to evaluate stress intensity factor of AZ31 magnesium alloy sheet appropriately.
作者 王建刚 赵红阳 巨东英
机构地区 Graduate School Department of Material Science and Engineering Department of Material Science and Engineering
出处 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2010年第7期1282-1287,共6页 中国有色金属学报（英文版）
关键词 Mg alloy PLATE cross-rolling isotropic material biaxial tension stress intensity factor AZ31镁合金板材 AZ31B镁合金 应力强度因子 拉伸载荷 Dugdale模型 评价 加载条件 影响模式
分类号 TG146.22 [金属学及工艺—金属材料]
  • 相关文献

参考文献16

  • 1胡小东,巨东英.Application of Anand's constitutive model on twin roll casting process of AZ31 magnesium alloy[J].中国有色金属学会会刊：英文版,2006,16(B02):586-590. 被引量：1
  • 2巨东英,胡小东.Effect of casting parameters and deformation on microstructure evolution of twin-roll casting magnesium alloy AZ31[J].中国有色金属学会会刊：英文版,2006,16(B02):874-876. 被引量：11
  • 3Yanghu Mou,Ray P.S. Han.Damage zones based on Dugdale model for materials[J]. International Journal of Fracture . 1994 (3)
  • 4JU Dong-ying,HU Xiao-dong,ZHAO Hong-yang.Inelastic behaviorand numerical analysis in twin-roll casting process of AZ31 alloy. Archives of Mechanics . 2009
  • 5WATANABE H,MUKAI T,HIGASHI K.High-strain-rate superplasticity in an AZ91 magnesium alloy processed by ingot metallurgy route. Materials Transactions . 2002
  • 6HU Xiao-dong.Studies on strip casting and rolling of magnesium alloy thin strip. . 2007
  • 7SOMEKAWA H,HOSOKAWA H,WATANABE H,HIGASHI K.Diffusion bonding in superplastic magnesium alloys. Materials Science Engineering A Structural Materials Properties Microstructure and Processing . 2003
  • 8HU Xiao-dong,JU Dong-ying,ZHAO Hong-yang.Thermal flow simulation and concave type slot nozzle design for twin roll casting of magnesium alloy AZ31. Materials Science Forum . 2007
  • 9KIM K H,LEE J G,BAE G T,BAE J H,KIM N J.Mechanical properties and microstructure of twin-roll cast Mg-Zn-Y alloy. Materials Transactions . 2008
  • 10SASAKI H,ADACHI M,TAKIMOTO A.Effect of microstructure on fracture toughness of AZ91 magnesium alloy. JSME(A) . 1996

二级参考文献19

  • 1WATARI H,HAGA T,DAVEY K,et al.Mechanical properties of magnesium alloy sheets produced by semi-sold roll strip casting[J].Mater Sci Forum,2003,426-432:617-622.
  • 2KLEINER S,BEFFORT O,WAHLEN A,UGGOWITZER P J.Microstructure and mechanical properties of squeeze cast and semi-solid cast Mg-Al alloys[J].J Light Metals,2002(2):277-280.
  • 3ZHU M F,KIM J M,HONG C P.Modeling f globular and dendritic structure evolution in solidification of an Al-7mass%Si alloy[J].ISIJ Inter,2001,41-49:992-998.
  • 4ZAPUSKALOV N.Quality improvement of cast strip by temperature treatment of liquid metal[J].ISIJ Inter,2004,44-29:1541-1548.
  • 5WANG Y,LIU G ,FAN Z.Microstructural evolution of rheo-diecast AZ91D magnsium alloy during heat treatment[J].Acta Materialia,2005,53-54:689-699.
  • 6Ju D Y, ZHAO H Y, HU X D. Thermal flow simulation on twin rollcasting process for thin strip production of magnesium alloy [J].Materials Science Forum, 2005, 488-489: 439-444.
  • 7DAALAND O, ESPEDAL A B, NEDREBERG M L, ALVESTAD I.Thin gauge twin-roll casting pess capabilities and product quality [A].Light Metals TMS[C]. Seattle: TMS, 1997. 745-752.
  • 8HWANG J D, LiNH J, HUANG W S, HU C T. Numericalsimulation of metal flow and heat transfer during twin roll strippcasting [J]. ISIJ Int 1995, 35(2): 170-177.
  • 9GUPTA M, SAHAI Y. Mathematical modeling of thermally inducedstresses in two-roll melt drag thin strip casting of steel [J]. ISIJ Int2000, 40(2): 137-143.
  • 10SAHAI Y, SAXENA A. Modeling of twin-roll thin strip casting ofaluminum alloys [A]. Light Metals TMS[C]. Seattle: TMS, 2002.643-650.

共引文献10

Transactions of Nonferrous Metals Society of China
2010年 第7期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部