期刊文献+

Structure and Corrosion Behaviours of Mo Modified Titanium in Saliva

Structure and Corrosion Behaviours of Mo Modified Titanium in Saliva
下载PDF
导出
摘要 The Mo surface modified layer on titanium was obtained by the plasma surface alloying technique. The structure and composition of the Mo modified titanium were investigated by X-ray diffraction (XRD) and glow discharge optical emission spectroscopy (GDOES). The Mo modified layer contains Mo coating on subsurface and diffusion layers between the subsurface and substrate. The Xray diffraction analysis of the Mo modified titanium reveals that the outmost surface of the Mo modified titanium is composed of pure Mo. The electrochemical corrosion performance of the Mo modified titanium in saliva was investigated and compared with that of titanium. The chemical corrosion performance of the Mo modified titanium in 37 ℃ saliva was investigated and compared with that of titanium. The experimental results indicated that self-corroding electric potentials and corrosion-rate of the Mo modified titanium were higher than that of titanium in saliva. Corrosion-rate of the Mo modified titanium was lower than that of titanium in 37 ℃ saliva. The Mo surface modified layer on titanium was obtained by the plasma surface alloying technique. The structure and composition of the Mo modified titanium were investigated by X-ray diffraction (XRD) and glow discharge optical emission spectroscopy (GDOES). The Mo modified layer contains Mo coating on subsurface and diffusion layers between the subsurface and substrate. The Xray diffraction analysis of the Mo modified titanium reveals that the outmost surface of the Mo modified titanium is composed of pure Mo. The electrochemical corrosion performance of the Mo modified titanium in saliva was investigated and compared with that of titanium. The chemical corrosion performance of the Mo modified titanium in 37 ℃ saliva was investigated and compared with that of titanium. The experimental results indicated that self-corroding electric potentials and corrosion-rate of the Mo modified titanium were higher than that of titanium in saliva. Corrosion-rate of the Mo modified titanium was lower than that of titanium in 37 ℃ saliva.
作者 姚晓红 唐宾
出处 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2010年第4期570-573,共4页 武汉理工大学学报(材料科学英文版)
基金 Funded by the ‘863" Program(2007AA03Z521) the National Natural Science Foundation of China (No.50771070) the Foundation for Re-turned Overseas Scholars of department of human research and social security of Shanxi Province
关键词 MO plasma surface alloying technique CORROSION Mo plasma surface alloying technique corrosion
  • 相关文献

参考文献2

二级参考文献18

  • 1侯滨,黄伟九,陈波水,周仲荣,李春生.AZ91D镁合金滑移区域微动磨损机理研究[J].摩擦学学报,2004,24(4):351-354. 被引量:9
  • 2秦林,唐宾,刘道新,徐重.钛合金Ti6Al4V表面Mo-N改性层的摩擦性能研究[J].稀有金属材料与工程,2005,34(9):1465-1468. 被引量:25
  • 3Kaestner P,Olfe J,He J W,Rie K T.Surface and Coatings Technology[J].2001,142~144:928
  • 4Zhongn Xu.U S Patent:4520268[P].1985; 4731539[P].1988
  • 5Lin Qin,Yanmei Qin,Xiaoping Liu,Bin Tang,Zhong Xu.Materials Science Forum (Mater Sci Forum)[J].2005,475~479:3947
  • 6ZhuH(朱昊) ZhouZR(周仲荣).摩擦学学报,2003,23(4):320-320.
  • 7Zhou Zhongrong(周仲荣),Vincent L.Fretting Wear(微动磨损)[M].Beijing:Science Press,2002:3
  • 8Han S,Kim H,Lee Y,Lee J,et al.Plasma source ion implantation of nitrogen, carbon and oxygen into Ti-6Al4V alloy. Surface and Coatings Technology . 1996
  • 9Chen A,Blanchard J,Conrad J R,et al.A study of the relationship between wear rate and nitrogen concentration profile and application to plasma source ion implanted Ti6Al-4V alloy. Wear . 1993
  • 10XIA Li-fang,JI Hong-bing,SUN Ming-ren,et al.Structure and frictional characteristics of Ti-6Al-4V plasma-based ion implanted with nitrogen then acetylene. Wear . 1999

共引文献13

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部