摘要
The hydroxyl-terminated polybutadiene （HTPB） possessing high content of 1,4-units was synthesized by anionic polymerization of butadiene, using alkyllithium containing silicon-protected hydroxyl group as initiator and cyclohexane as solvent. The polymers were characterized by GPC, IR and 1H-NMR. The mechanical properties of cured films were also evaluated. The results show that the content of 1,4-units for HTPBs made by anionic polymerization reaches up to 90%. The molecular weight distribution is very narrow （〈 1.05）. The functionality of hydroxyl groups approaches 2. Compared with free radical HTPB, the elongation at break of anionic HTPB films increased by 70%, while the tensile strength remained nearly unchanged. This new HTPB can be very useful in solid propellant.
The hydroxyl-terminated polybutadiene （HTPB） possessing high content of 1,4-units was synthesized by anionic polymerization of butadiene, using alkyllithium containing silicon-protected hydroxyl group as initiator and cyclohexane as solvent. The polymers were characterized by GPC, IR and 1H-NMR. The mechanical properties of cured films were also evaluated. The results show that the content of 1,4-units for HTPBs made by anionic polymerization reaches up to 90%. The molecular weight distribution is very narrow （〈 1.05）. The functionality of hydroxyl groups approaches 2. Compared with free radical HTPB, the elongation at break of anionic HTPB films increased by 70%, while the tensile strength remained nearly unchanged. This new HTPB can be very useful in solid propellant.
基金
supported by the Lanzhou Petrochemical Company.
