期刊文献+

电弧炉电极调节系统自适应控制的仿真研究 被引量:24

Simulation on Adaptive Control of Electrode Regulator Systems of Arc Furnace
下载PDF
导出
摘要 研究了电弧炉电极调节系统的自适应控制问题。首先得出了电极调节系统的模型,然后将系统非线性的传递算子用线性的传递函数序列等效表示,在此基础上得到了模型参考自适应控制的方案。仿真结果表明自适应控制比PID控制有更好的动态性能,对弧长扰动的抑制能力大大增强。 It is made research on adaptive control of electrode regulator systems of arc furnace.First, the model of electrod regulator systems is obtained, then a seris of linear transfer functions ofthe systenis are used equivalently instead of the nonlinear transfer operator. Based on that, the planeof model reference adaptive control is put foword. The results of simulation shows that adaptive con-trol systenis has a more better dynamic characteristics than PID control systems, and strengthensgreatly capability of restraining the disturbtance of arc length.
机构地区 西安理工大学
出处 《电工技术学报》 EI CSCD 北大核心 1999年第1期17-22,共6页 Transactions of China Electrotechnical Society
基金 陕西省自然科学基金 机械部教育司基金
关键词 电弧炉 电极调节系统 自适应控制 仿真 Arc furnace Electrod regulator systems Adaptive control Simulation
  • 相关文献

参考文献10

  • 1周卫,张冬,黎明.电弧炉微机控制系统[J].工业加热,1994,23(4):24-27. 被引量:1
  • 2袁文枢.一个高性能的电弧炉电极自动控制系统[J].冶金自动化,1994,18(3):48-50. 被引量:3
  • 3刘小河 程少庚 等.三相电弧炉电气系统的模型探讨[J].陕西机械学院学报,1988,4(1):73-82.
  • 4[法]朗道ID 吴百凡译.自适应控制——模型参考方法[M].北京:国防工业出版社,1985..
  • 5Liu Xiaohe,Proc Int Conf Power System Technology,1994年,183页
  • 6袁文枢,工业加热,1994年,6期,32页
  • 7李清泉,自适应控制系统理论、设计与应用,1990年
  • 8刘小河,陕西机械学院学报,1988年,4卷,1期,73页
  • 9吴百凡(译),自适应控制.模型参考方法,1985年
  • 10刘小河,程少庚,苏文成.电弧炉电气系统的谐波分析研究[J].电工技术学报,1994,9(2):21-26. 被引量:30

二级参考文献7

  • 1刘小河,陕西机械学院学报,1988年,4卷,1页
  • 2过增元,电弧和热等离子体,1986年
  • 3杨绍祺,计算机辅助电路设计,1984年
  • 4王其平,电器电弧理论,1982年
  • 5团体著者,计算方法,1979年
  • 6王其平,电器中的电弧理论,1963年
  • 7李传拭,电弧炼钢的合理用电规范,1958年

共引文献31

同被引文献113

引证文献24

二级引证文献66

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部