摘要
本文介绍了一种简单的提高直齿轮传动可分性的方法，以满足齿轮传动中心距在一定范围内可调的特殊要求。
出处
《机械传动》
CSCD
北大核心
1999年第1期39-41,共3页
Journal of Mechanical Transmission
参考文献1
-
1西北工业大学机械原理及机械零件教研组，机械设计，1978年
同被引文献15
-
1肖利民,唐进元.低噪声齿轮设计方法（一）[J].制造技术与机床,1995(5):30-33. 被引量：20
-
2A. Kahraman, G. W. Blankenship. Effect of involute tip relief on dynamic response of spur gear pairs [J]. Transactions of the ASME, J of Mech. Design 1999,121(2): 313-315.
-
3S. Baud, P. Velex. Static and dynamic tooth loading in spur and helical gear systems-experiments and model validation [J]. Transactions of the ASME, J of Mech. Design, 2002, 124(2) : 334-346.
-
4Chuen-Huei Liou, Hsiang His Lin, F. B. Oswald, et al. Effect of contact ratio on spur gear dynamic load with no tooth profile modifications[J]. Transactions of the ASME, J of Mech. Design 1996, 118(3): 439-443.
-
5F. L. Litvin, I. H. Seol, D. Kim, J. Lu, et al. Kinematic and geometric models of gear drives [J]. Transactions of the ASME, J of Mech. Design 1996, 118(4): 544-550.
-
6Parag Wagaj, Ahmet Kahraman. Influence of tooth profile modification on helical gear durability[J]. Transactions of the ASME, J of Mech. Design 2002, 124(3):501-510.
-
7A. Kahraman, G. W. Blankenship.Effect of involute tip relief on dynamic response of spur gear pairs [J]. Transactions of the ASME, J of Mech. Design 1999,121 (2): 313-315.
-
8Alfonso Fuentes, Faydor L. Litvin, Baxter R.Mullins, Ron Woods, Robert F. Handschuh. Design and stress analysis of low-noise adjusted bearing contact spiral bevel gears[J]. Transactions of the ASME, J of Mech. Design 2002,124 (3):524-532.
-
9S. Baud, P. Velex. Static and dynamic tooth loading in spur and helical gear systems - experiments and model validation. Transactions of the ASME, J of Mech [J]. Design, 2002,124(2 ):334-346.
-
10Chuen-Huei Liou, Hsiang His Lin, F. B. Oswald, D. P. Townsend. Effect of contact ratio on spur gear dynamic load with no tooth profile modifications. Transactions of the ASME, J of Mech [ J ].Design, 1996,118 ( 3 ) :439-443.
-
1徐涛金,梁举科.考虑齿廓修形直齿轮传动系统动态响应数值分析[J].组合机床与自动化加工技术,2016(4):93-96. 被引量：2
-
2张义民,杨健,胡鹏,王全彬.考虑变位系数的直齿轮啮合特性分析[J].东北大学学报（自然科学版）,2013,34(9):1287-1291. 被引量：6
-
3林继文,阮孔腾.渐开线标准圆柱直齿轮传动的滑动系数的计算[J].机电工程,1996,13(4):39-40. 被引量：3
-
4曹频,陈志平,张巨勇,汪新中,傅立超.钢带精密摩擦传动试验台的设计[J].机械传动,2009,33(4):42-44. 被引量：1
-
5毕春长,张有忱.基于神经网络的渐开线圆柱齿轮动态优化设计[J].北京化工大学学报（自然科学版）,2003,30(5):79-81.
-
6杨铁男,崔洪斌.直齿圆柱齿轮振动模型的建立[J].河北机电学院学报,1995,12(1):7-11.
-
7王魄,张和豪,奚鹰.直齿轮传动中各啮合点的齿间载荷和油膜厚度的分布规律[J].上海大学学报（自然科学版）,1996,2(6):647-652. 被引量：1
-
8赵昕,陈长征,刘杰.风电齿轮箱直齿轮传动系统动态特性影响分析[J].重型机械,2015(2):22-25. 被引量：3
-
9王维凯,张和豪.直齿轮传动弹流润滑的瞬态效应[J].上海工业大学学报,1994,15(2):125-129.
-
10余驰.机械精密传动消隙结构分析与研究[J].机械研究与应用,2016,29(1):8-11. 被引量：3
