期刊文献+

减小永磁同步伺服直线电机磁阻力的研究 被引量:1

Research on Reducing Magnetic Detent Force of Permanent-magnet Sync-servo Line Motor
下载PDF
导出
摘要 基于单个齿与永磁体产生磁阻力的分析,推导出电机的磁阻力。采用有限元法,分析电枢边端齿的磁场分布情况。缩短边端齿以改变边端磁场分布,减小边端效应引起的磁阻力。样机测试结果表明本文提出的方法可行。 The magnetic detent force of the permanent-magnet sync-servo line motor is deduced based on the analysis of that force produced by individual tooth and the magnet.Using the finite element method,the distribution of magnetic field at the end teeth of stator is analyzed.The distribution is varied by shortening the end teeth.The test result on prototype shows that the proposed method is feasible.
出处 《煤矿机电》 2010年第4期4-6,共3页 Colliery Mechanical & Electrical Technology
关键词 永磁同步伺服直线电动机 磁阻力 边端齿 有限元法 permanent-magnet sync-servo line motor magnetic detent force end tooth finite element method
  • 相关文献

参考文献5

  • 1Zou Jibin,Hu Jianhui, Liang Weiyan. Quantitatively Evaluation on the Cogging Torque of Permanent Magnet Motor Caused by Stator and Rotor Defect[J]. IEEE Transactions on magnetics, 1995,31.(6).
  • 2D.C. Hanselman. Effect of skew, pole count and slot count onbrushless motor radial force, cogging torque and back EMF. IEE Proc-Electr [ J ]. Power Appl., 1997,144 ( 5 ).
  • 3Ge Xin, Han Guangxian, Chang Zhi, Wang Zong pei. Research of Cogging Torque in the Brushless DC Motor with Fractional Ratio of Slots and Poles [ C ]. ICEMS 2005 : Proceedings of the Eighth International Conference on Electrical Machines and Systems.
  • 4潘开林,傅建中,陈子辰.永磁直线同步电机的磁阻力分析及其优化[J].浙江大学学报(工学版),2005,39(10):1627-1632. 被引量:27
  • 5Yubo Yang, Xiuhe Wang, Rong Zhang,Changqing Zhu, Tingting Din. Research of Cogging Torque Reduction by Different Slot Width Pairing in Permanent Magnet Motors [ C ]. ICEMS 2005 : Proceedings of the Eighth International Conference on Electrical Machines and Systems.

二级参考文献11

  • 1ZHU Z O, XIA Z P, HOWE D, et al. Reduction of cogging force in slotless linear permanent magnet motors[J]. Electric Power Applications, IEE Proceedings, 1997, 144(4): 277-282.
  • 2INOUE M, SATO K. An approach to a suitable stator length for minimizing the detent force of permanent magnet linear synchronous motors[J]. IEEE Transactions on Magnetics, 2000, 36(4): 1890-1893.
  • 3HWANG S, LIEU D K. Design techniques for Reduction torque in brushless permanent magnet motors [J]. IEEE Transactions on Magnetics, 1994, 30(6): 4287-4289.
  • 4JIN H. A method for reduction of cogging torque in brushless DC motor considering the distribution of magnetization by 3D EMCN [J]. IEEE Transactions on Magnetics, l998,34(5): 3532-3535.
  • 5TAKEO I. A method of reducing ripple torque in permanent magnet motors without skewing[J]. IEEE Transactions on Magnetics, 1993, 29(2): 2028-2031.
  • 6LI T Z, STEMON G. Reducing of cogging torque permanent motor [J]. IEEE Transactions on Magnetics, 1988, 24(6): 2901-2903.
  • 7CHANG S. Magnetic pole shape optimization of permanent magnet motor for Reduction of cogging torque [J]. IEEE Transactions on Magnetics, 1997, 33(2): 1822-1827.
  • 8CHUNG T K. Optimal shape design for the Reduction of cogging torque of brushless DC motor using evolution strategy [J]. IEEE Transactions on Magnetics, 1997, 33(2): 1908-1911.
  • 9李庆雷,王先逵,吴丹,刘成颖,石忠东.永磁同步直线电机推力波动分析及改善措施[J].清华大学学报(自然科学版),2000,40(5):33-36. 被引量:93
  • 10王兴华,励庆孚,王曙鸿.永磁无刷直流电机磁阻转矩的解析计算方法[J].中国电机工程学报,2002,22(10):104-108. 被引量:51

共引文献26

同被引文献7

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部