谈UV淋幕式平面涂装机的成幕

Discussion on the Principle of Taking form a Film for UV Plane Flow Coating Machine

目前，UV淋幕式平面涂装机在我国尚处研制阶段，其成幕原理各说不一。就成幕而言，既可因重力自流而成，也可靠施加压力动压而成。本文根据分析计算和实例认为，适合竹木板材的UV油漆必须加压成幕。

The plane flow coating machine is being developed in china, there is no an identicalview about the principle of taking form the film, several men holds different opinions. As far asfilming, both by gravitative itself and the external pressure can do.This article considered that the surface UV painting film for wooden and bamboo board must beformed by external pressure kinematically press it, according to the analytical count and a real example.