摘要
套管错断井修复技术是目前制约油田正常开发的瓶颈技术。针对文卫马油田Φ139.7mm油层套管进行了套管错断井修复试验研究,分别进行了偏心拨套器、短套铣筒开喇叭口和套管错断井扶正3种修复实践。现场试验表明,这3种技术明显提高了套管错断事故井的修复成功率,具有技术简单易用、周期短、费用低的优点,有推广价值。
Workover technology for wells with broken casing is the current bottleneck restricting normal development of oilfields.Workover test is conducted on Φ139.7 mm inch casing in Wenweima Oilfield,three types of workover practice are conducted including the technology for workover of eccentric casing pulling machine,the technology for opening bell at the broken casing in short washover tool,and centralization of wells with broken casing.Field test shows that the three technologies significantly increase the success ratio of workover of wells with broken casing,they are easy to use,having short cycle and low cost.
出处
《石油钻采工艺》
CAS
CSCD
北大核心
2010年第4期125-127,共3页
Oil Drilling & Production Technology
基金
中石化股份有限公司中原油田分公司攻关项目“套管修复配套应用”(编号:2009-001)部分研究成果
关键词
文卫马油田
套管错断井
修复
实践
Wenweima Oilfield
well with broken casing
workover
practice