摘要
以CuO、Cr2O3、Al为原料,采用自蔓延法制备Cu-Cr合金,考察了不同添加剂对Cu-Cr合金结构和纯度的影响。结果表明,合金由Cu、Cr相以及少量的Cr23C6相组成,熔渣由Al2O3相和Na3AlF6相以及少量的Cr相组成,熔渣中存在Cr相表明渣分离效果不理想。随着Na3AlF6配料量的增加,合金中氧化物夹杂得到有效去除,合金的微观结构变得致密均匀。随着铝粉配料量的增加,合金中氧含量降低,但铝残留量增加,合金的纯度大于97.0%。
CuCr alloy was prepared with CuO,Cr2O3 and Al as reactants by SHS,and effects of different additives on the microstructure and purity of alloy prepared were investigated. The results reveal that the alloy is composed of Cu phase,Cr phase and a little Cr23C6 phase,and slag consists of Al2O3 and Na3AlF6 as well as a little Cr phase. Cr existence shows the dis-ideal separation effects of metal from slag. With increasing in Na3AlF6 addition,microstructure of the alloy exhibits uniform and compact as a result of effectively removing oxides inclusion in the CuCr alloy,meanwhile,oxygen content in the alloy is decreased with increasing in residual Al content,and purity of the alloy is more than 97%.
出处
《特种铸造及有色合金》
CAS
CSCD
北大核心
2010年第8期687-690,共4页
Special Casting & Nonferrous Alloys
基金
国家自然科学基金资助项目(50874027
50644016
50704011)
国家高技术研究发展计划(863计划)资助项目(2007CB613504)
中央高校基本科研业务费资助项目(N090402015)