期刊文献+

油酸酰胺的选择性加氢工艺研究

Study on Selective Hydrogenation of Oleic Acid Amide
下载PDF
导出
摘要 研究首次提出油酸酰胺直接选择性加氢工艺,选用价格低廉的骨架镍催化剂对油酸酰胺进行了选择性加氢,取得了较好的效果。实验结果表明,通过选择性加氢工艺,其中的亚油酸酰胺、亚麻酸酰胺等不饱和组分大部分转化为油酸酰胺而被除去,油酸酰胺含量由67.532%增加到76.198%,提高了油酸酰胺的含量和使用性能。得出反应条件为:反应温度160℃,反应压力405.3 kPa,反应时间3.0 h,催化剂加量3%。 The direct selective hydrogenation of oleic acid amide was firstly put forward in this paper,and cheap sponge Ni was used as catalyst,the result was satisfactory.The results show that majority impurity of oleic acid amide is removed via selective hydrogenation,linoleic and linolenic in product are mostly transformed into oleic acid amide which can improve content and performance of product(the content of oleic acid amide in product raises 76.198% from 67.532% via hydrogenation).The reaction conditions are obtained: reac-tion temperature 160℃,reaction pressure 4MPa,reaction time 3 h,catalyst dosage 3%.
出处 《辽宁化工》 CAS 2010年第8期803-805,共3页 Liaoning Chemical Industry
关键词 骨架镍 油酸酰胺 选择性加氢 Sponge nickel Oleic acid amide Selective hydrogenation
  • 相关文献

参考文献2

  • 1贝雷.贝雷油脂化学与工艺学[M].北京:轻工业出版社,1989.213-214.
  • 2H.C.阿鲁楚尼亚恩.油脂加工工艺[M].北京:中国石化出版社,1990:96-98.

共引文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部