摘要
为了克服经验模态分解中出现的模态混叠现象,提出了一种基于改进的掩膜信号法的经验模态分解方法。该方法通过设置掩膜信号,并依据能量法优化掩膜信号的选择,结合经验模态分解达到了消除模态混叠现象的目的,并利用仿真信号以及齿轮箱振动信号进行了验证。试验结果表明,该方法可有效分离混叠模态,提取有用信号。
In order to solve the mode mixing problem encountered in the standard EMD(empirical mode decomposition),an improved EMD method is suggested in this work.In the method,a masking signal selected by optimization according to energy method is composed with the signal to be decomposed;then the composed singnal is decomposed by using EMP mehtod.In this way,the mode mixing phenomenon could be eliminated.The method also allows EMD to be used to separate components that are similar in frequency that would be inseparable with standard EMD techniques.Experimental results show that the method suggested in this work is practical and effective.
出处
《振动.测试与诊断》
EI
CSCD
北大核心
2010年第4期434-439,共6页
Journal of Vibration,Measurement & Diagnosis
基金
国家自然科学基金资助项目(编号:50575233
60804018)
国家高技术研究发展计划("八六三"计划)资助项目(编号:2008AA042408)
关键词
模态混叠
掩膜信号
经验模态分解
振动信号
故障诊断
mode mixing masking signal empirical mode decomposition vibration signal fault diagnosis