摘要
Cu46Zr47-xA17Mx （M = Ce, Pr, Tb, and Gd） bulk metallic glassy （BMG） alloys were prepared by copper-mold vacuum suction casting. The effects of rare-earth elements on the glass-forming ability （GFA）, thermal stability, and mechanical properties of Cu46Zr47-xA17Mx were investigated. The GFA of Cu46Zr47-xA17Mx （M = Ce, Pr） alloys is dependent on the content of Ce and Pr, and the optimal content is 4 at.%. Cu46Zr47-xA17Thx（X = 2, 4, and 5） amorphous alloys with a diameter of 5 mm can be prepared. The GFA of Cu46Zr47-xA17Gdx（x = 2, 4, and 5） increases with increasing Gd. Tx and Tp of all decrease. Tg is dependent on the rare-earth element and its content. ATx for most of these alloys decreases except the Cu46Zra2Al7Gd5 alloy. The activation energies △Eg, △Ex, and △Ep for the Cu46Zr42A17Gd5 BMG alloy with Kissinger equations are 340.7, 211.3, and 211.3 kJ/mol, respectively. These values with Ozawa equations are 334.8, 210.3, and 210.3 kJ/mol, respec- tively. The Cu46Zr45Al7Tb2 alloy presents the highest microhardness, Hv 590, while the Cu46Zr43A17Pr4 alloy presents the least, Hv 479. The compressive strength （at.f.） of the Cu46Zra3A17Gd4 BMG alloy is higher than that of the Cu46Zr43Al7Tb4 BMG alloy.
Cu46Zr47-xA17Mx （M = Ce, Pr, Tb, and Gd） bulk metallic glassy （BMG） alloys were prepared by copper-mold vacuum suction casting. The effects of rare-earth elements on the glass-forming ability （GFA）, thermal stability, and mechanical properties of Cu46Zr47-xA17Mx were investigated. The GFA of Cu46Zr47-xA17Mx （M = Ce, Pr） alloys is dependent on the content of Ce and Pr, and the optimal content is 4 at.%. Cu46Zr47-xA17Thx（X = 2, 4, and 5） amorphous alloys with a diameter of 5 mm can be prepared. The GFA of Cu46Zr47-xA17Gdx（x = 2, 4, and 5） increases with increasing Gd. Tx and Tp of all decrease. Tg is dependent on the rare-earth element and its content. ATx for most of these alloys decreases except the Cu46Zra2Al7Gd5 alloy. The activation energies △Eg, △Ex, and △Ep for the Cu46Zr42A17Gd5 BMG alloy with Kissinger equations are 340.7, 211.3, and 211.3 kJ/mol, respectively. These values with Ozawa equations are 334.8, 210.3, and 210.3 kJ/mol, respec- tively. The Cu46Zr45Al7Tb2 alloy presents the highest microhardness, Hv 590, while the Cu46Zr43A17Pr4 alloy presents the least, Hv 479. The compressive strength （at.f.） of the Cu46Zra3A17Gd4 BMG alloy is higher than that of the Cu46Zr43Al7Tb4 BMG alloy.
