期刊文献+

基于ARM和CAN总线的土木工程施工信息无线测控系统

Wireless Monitoring System of Construction Information in Civil Engineering Based on ARM and CAN Bus
下载PDF
导出
摘要 设计了一款高精度的土木工程施工信息检测系统。选用ARM7系列主控制芯片,具有较高的实时性;主卡和各采集卡之间采用基于CAN总线的通信方式,板卡更换方便且具有良好的可扩展性。上位机与数据采集系统之间采用无线传输的通讯方式,并在主控板上用Flash进行数据备份。试验表明该系统稳定可靠,性价比高。 A high accuracy wireless monitoring system of construction information in civil engineering is designed in the article.ARM 7 processor is used in this real-time system.The main card communicate with the collection cards by CAN bus.It is easy to change the card and the expansibility of the system is improved.Super-computer and data acquisition system communicate with each other by wireless equipment,and a flash chip is appended on the main control board for data backup.The experimental result shows that the system is stable and has good cost performance.
出处 《舰船电子工程》 2010年第7期156-160,共5页 Ship Electronic Engineering
关键词 ARM7 CAN总线 高精度 无线通讯 flash数据备份 ARM CAN bus high accuracy wireless communication flash data backup
  • 相关文献

参考文献7

二级参考文献6

  • 1马忠梅 马广云.ARM嵌入式处理器结构与应用基础[M].北京:北京航天航空大学出版社,2003..
  • 2周立功.ARM微控制器基础教程与实践[M].北京:北京航空航天大学出版社,2005.
  • 3杜春雷.ARM体系结构与编程[M].北京:北京清华大学出版社,2005.
  • 4ARM Incorporated. Embedded software development with ADS vl. 2 [Z]. 2002.
  • 5David Seal. ARM architecture reference manual[M]. Second Edition.
  • 6ARM Incorporated. ARM7TDMI technical reference manual[Z]. 2004.

共引文献31

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部