期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

瓦楞纸印刷开槽模切机送纸机构主轴橡胶材料模态分析及测试

Modal Analysis and Testing for the Rubber Material Main Shaft of Paper Advance Mechanism in Corrugated Paper Printing Slotting Die Cutting Machine
下载PDF
导出
摘要 利用ABAQUS和COSMOSWORKS对送纸机构主轴进行线性等效模态分析,计算出前10阶固有频率和振形,并与实际测试结果进行对比。研究结果表明:橡胶材料的非线性特征在高精度的测试分析中不能忽略;橡胶材料弹性模量的线性近似方法有较好的精度。 Modal analysis of equivalent linearization for main shaft of paper advance mechanism was studied by means of ABAQUS and COSMOSWORKS software,and top ten orders of natural frequency and mode of vibration were calculated,and were compared with the actual testing result.The research results show that the nonlinear feature of rubber material shall not be neglected during a high precision testing analysis;the linear approximate method for elastic modulus of rubber material has a relatively good precision.
作者 王晓临 常舟 李克天
机构地区 湖北大学 广东工业大学
出处 《包装工程》 CAS CSCD 北大核心 2010年第17期101-103,共3页 Packaging Engineering
基金 广东省科技计划项目(2009B010900031) 粤港关键领域重点突破项目(佛山专项)(2009Z013)资助
关键词 送纸机构主轴 橡胶材料 模态分析 测试研究 main shaft of paper advance mechanism rubber material modal analysis testing research
分类号 TB486.1 [一般工业技术—包装工程]
  • 相关文献

参考文献5

  • 1魏志刚,汤文成.复合材料网格结构模态分析的均匀化等效建模[J].复合材料学报,2008,25(2):188-193. 被引量：9
  • 2叶修梓,陈超祥.COSMOSWORKS基础教程[M].北京:机械工业出版社,1996.
  • 3MOAVENISaeed.有限元分析--ANSYS理论与应用[M].王崧,董春敏,金云平,译.2版.北京:北京空电子工业出版社,2005.
  • 4ZIENKIEWICZOC,TALYORRL.有限元方法(第5版)基本原理[M].曾攀,译.北京:清华大学出版社,2008.
  • 5吴先梅 钱孟骤.用于换能器校准的激光测量干涉技术.S声学技术,2002,(2):83-85.

二级参考文献11

  • 1Slinchenko D, Verijenko V E. Lattice shells of revolution on the basis of smearing stiffness [J]. Computers and Structures, 2001, 54: 341-348.
  • 2Yu Wenbin, Tang Tian. Variational asymptotic method for unit cell homogenization of periodically heterogeneous materials [J]. 2007, 44: 3738-3755.
  • 3Gonella Stefano, Ruzzene Massimo. Homogenization of vibrating periodic lattice structures [J]. Applied Mathematical Modelling, 2007, 1-24.
  • 4Burgardt B, Cartraud P. Continuum modeling of beamlike lattice trusses using averaging methods [J]. Computers and Structures, 1999, 73: 267-279.
  • 5Challagulla K S, Georgiades A V, Kalamkarov A L. Asymptotic homogenization modeling of thin composite network structures [J]. Composite Structures 2007, 79: 432-444.
  • 6Saha Gobinda C, Kalamkarov Alexander L, Georgiades Anastasis V. Asymptotic homogenization modeling and analysis of effective properties of smart composite reinforced and sandwich shells [J]. International Journal of Mechanical Sciences, 2007, 49: 138-150.
  • 7Hassani B, Hiinton E. A review of homogenization and topology optimization Ⅰ: Homogenization theory for media with periodic structure [J]. Computers and Structures, 1998, 69: 707-717.
  • 8Hassani B, Hiinton E. A review of homogenization and topology optimization Ⅱ : Analytical and numerical solution of homogenization equations [J]. Computers and Structures, 1998, 69: 719-738.
  • 9Moreau G, Caillerie D. Continuum modeling of lattice structures in large displacement applications to buckling analysis [J]. Computers and Structures, 1998, 68: 181-189.
  • 10Ziegler Edward, Accorsia Michael, Bennett Mark. Continuum plate model for lattice block material [J]. Mechanics of Materials, 2004, 36: 753-766.

共引文献8

包装工程
2010年 第17期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部