期刊文献+

从铜阳极泥中加压浸出铜 被引量:7

Pressure Leaching of Copper From Copper Anode Slime
下载PDF
导出
摘要 研究了采用高压酸浸工艺处理铜阳极泥。对铜阳极泥进行预处理后,再控制浸出时的温度140℃,氧分压0.9 MPa,液固体积质量比5∶1,硫酸质量浓度250 g/L,通氧时间150 min,可有效地浸出铜,铜浸出率达93%以上,贵金属也得到富集。 Treatment of copper-slime with high-pressure acid-leaching process has been studied. First, the copper-slime was pre-treated at general conditions,then high-pressure leached at the conditions of temperature of 140℃ ,oxygen partial pressure of 0.9 MPa, solid-to-liquid ratio of 5 : 1, mass concentration of sulphuric acid of 205 g/L and oxygenation time of 150 min, copper leaching rate reached 93 %,and other precious metals were also enriched.
作者 陈志刚
出处 《湿法冶金》 CAS 北大核心 2010年第3期181-183,共3页 Hydrometallurgy of China
关键词 铜阳极泥 高压 浸出 opper anode slime high-pressure leaching copper
  • 相关文献

参考文献6

二级参考文献36

共引文献64

同被引文献135

引证文献7

二级引证文献43

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部