期刊文献+

脉冲电磁场对草酸钴粉末表面分维的影响 被引量:1

Effects of pulsed electromagnetic field on surface fractal dimensions of cobalt oxalate powders
下载PDF
导出
摘要 以氯化钴为原料,草酸铵为沉淀剂,在脉冲电磁场作用下,采用常规沉淀方法成功地制备了形貌不同的草酸钴粉体,SEM照片和颗粒表面3D视图分析显示草酸钴团聚体颗粒具有分形结构特征。采用差分盒维法计算了团聚体颗粒表面的分形维数,并采用分形维数和轴向比对草酸钴粉末颗粒的形貌进行了表征。结果表明,施加脉冲电磁场条件下制备的草酸钴粉末颗粒的表面分形维数在1.986~2.096之间;脉冲电磁场的作用使草酸钴分维D值增大,颗粒分形形态由开放型转变为紧密型。 Cobalt oxalate powders with various morphologies were successfully prepared from ammonium oxalate and cobalt chloride by conventional precipitation when the pulsed electromagnetic field(PEMF) was introduced.SEM images and 3-D graph of cobalt oxalate particles investigations revealed that the as-prepared products had fractal structure characteristic.The surface fractal dimensions of cobalt oxalate aggregate were calculated using differential box counting(DBC) algorithm.The morphologies of the prepared samples were characterized by surface fractal dimensions and aspect ratio.The results indicate that the surface fractal dimensions of cobalt oxalate particles prepared with the presence of PEMF are in the range of 1.986 to 2.096,and that the surface fractal dimensions increase under the action of PEMF so that the fractal morphology of particles turns from open-structure to tight-structure accordingly.
出处 《解放军理工大学学报(自然科学版)》 EI 北大核心 2010年第4期473-477,共5页 Journal of PLA University of Science and Technology(Natural Science Edition)
基金 国家自然科学基金资助项目(50674054)
关键词 草酸钴粉体 形貌 分形维数 脉冲电磁场 cobalt oxalate powder morphology fractal dimension pulsed electromagnetic field
  • 相关文献

参考文献19

  • 1ROURE S, BOUVARD D, DOREMUS P, et al. Analysis of die compaction of tungsten carbide and cobalt powder mixtures [J]. Powder Metallurgy, 1999,42 (2) : 164-170.
  • 2GILLIA O, BOUVARD D. Phenomenological analysis of densification kinetics during sintering: application to WC-Co mixture[J]. Materials Science and Engineering, 2000,279(1-2) : 185-191.
  • 3MAO L C, SHAN Z Q, YIN S H, et al. Effect of cobalt powder on the inner pressure of Ni/MH batteries[J]. Journal of Alloys and Compounds, 1999,293- 295:825-828.
  • 4LIU Y, ZHU Y, ZHANG Y, et al. Preparation of nanocrystalline cobalt powders by a Y-irradiation method[J]. Journal of Material Chemistry, 1997, 7 (5) : 787-789.
  • 5LIU Sha, XU Kai-hua, WANG Min. Preparation of co powders for cemented carbides in China[J]. International Journal of Refractory Metals & Hard Materials, 2006,24:405-412.
  • 6TIKKANEN M H, TASKINEN A, TASKINEN P. Characteristic properties of cobalt powder suitable for hard metal production[J]. Powder Metallurgy, 1975, 18:259-282.
  • 7高晋,王洪军.前驱物颗粒的形貌对钴粉形貌的影响[J].稀有金属与硬质合金,2002,30(2):15-18. 被引量:19
  • 8NASSIRA C, GUILLAUME V, CHRISTIAN R, et al. Cobalt-based anisotropic particles prepared by the polyol process[J]. Journal of Materials Chemistrys, 2003, (13) :312-318.
  • 9WANG Wei-wei, ZHU Ying-jie. Microwave-assisted synthesis of cobalt oxalate nanrods and their thermal conversion to Co3O4 rods[J]. Materials Research Bulletin, 2005, (40) : 1929-1935.
  • 10郑洲顺,曲选辉,李云平.还原钴粉末的分形描述[J].稀有金属材料与工程,2004,33(4):393-396. 被引量:7

二级参考文献21

  • 1[1]MANDELBROT B. Les objets fractals,forme,hazard et dimension[M]. Paris:Flammarion,1975.
  • 2[2]FORREST S, WITTEN T A. Long-range correlatio-ns in smoke particle aggregates[J].J Phys(A),1979 (12):109-117.
  • 3[3]BOTET R, JULLIEN R. Fractal aggregates of particles[J]. Phase Transitions,1990,24-26:691-736.
  • 4[4]OHARA P C, LEFF D V, HEALTH J R, et al. Crystallization of opals from polydisperse nanoparti-cles [J]. Phys Rev Lett,1995,75:3466-3469.
  • 5[5]MEAKIN P. Fractals, scaling and growth far from equilibrium[M].Cambridge: Cambridge University Press, 2001.
  • 6[6]MIN H,GONG Y C, ZHANG H Q, et al. Fractal aggregation of nanometer-sized lithium fluoride partic-les[J]. Chinese J of Mater Res, 1994(S1):322-325.
  • 7Rosof B H. The Metal Injection Molding Process Comes of Age[J]. J of Mater, 1989, 41(8): 13~16
  • 8German R M. Powder Injection Molding[M]. N J: Metal Powder Industries Press, 1991: 80
  • 9Mandelbrot B B. The Fractal Geometry of Nature[M]. New York: Freeman, 1982: 60
  • 10German R M. Powder Metallurgy Science[M]. N J: Metal Powder Industries Press, 1984: 10~46

共引文献33

同被引文献15

引证文献1

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部