摘要
应用用户宏程序及仿真加工技术,设计了一个能够实现矩形外形(矩形、圆角形和键槽形)和矩形型腔(圆角形、键槽形和空白槽形)的粗加工,精加工,粗、精连续加工程序。建立了对应的参数变量,并在数控仿真软件里模拟加工轨迹后再在机床上进行了实际加工进行验证。
The user macro program and simulation of machining technology were used to achieve a rectangular shape (rectangle, rounded shape and keyway) and the rectangular cavity (rounded shape, keyway and blank groove-shaped) roughing, finishing and coarse, fine continuous processing program. The corresponding parameter variables were established, and the working track was simulated by machining simulation software, then the actual working verification was carried out on NC machine.
出处
《精密成形工程》
2010年第5期83-87,共5页
Journal of Netshape Forming Engineering
关键词
宏程序
数控铣床
数控编程
Macro program
NC Milling machine
NC programming