期刊文献+

碳纳米管/聚氨酯复合材料的制备及生物相容性评价 被引量:5

Preparation and biocompatibility evaluation of polyurethane filled with carbon nanotubes
下载PDF
导出
摘要 目的制备和评价碳纳米管/聚氨酯复合材料的生物相容性。方法通过溶胶-凝胶方法制备碳纳米管/聚氨酯复合材料,对其力学性能进行测试;根据ISO10993指南,选取溶血实验、动态凝血实验、血小板黏附实验、血小板活化实验、细胞毒性实验和材料局部植入方法对复合材料的生物相容性进行评价。结果复合材料无明显细胞毒性,并表现出比聚氨酯材料更好的抗溶血性能、动态凝血性能、抑制血小板黏附性能以及组织相容性。结论碳纳米管/聚氨酯复合材料具有优良的生物相容性,可以作为制备组织工程细胞生长支架、人工血管、药物载体的基础材料。 Objective To prepare and evaluate the biocompatibility of carbon nanotubes-polyurethane composite.Methods Multiwalled carbon nanotubes were introduced into a polyurethane elastomer through process of sol-gel.The biocompatibilities including cytotoxcicity,tissue compatibility,hemolysis,dynamic coagulation time,and platelets activation was evaluated according to the guideline of ISO10993.The tensile strength and elongation rate of the composite were also tested.Results The composite showed the excellent mechanical property of polyurethane;meanwhile,there was nocytotoxicity observed with fibroblasts,inflammation was inhibited,and platelets activation was significantly decreased.Conclusion A new composite of carbon nanotube-polyurethane were obtained and its biocompatibility was improved notably.
出处 《基础医学与临床》 CSCD 北大核心 2010年第9期897-901,共5页 Basic and Clinical Medicine
基金 国家自然科学基金(30270394 90606018)
关键词 生物相容性 抗凝血 炎性反应 复合材料 聚氨酯 biocompatibility anti-coagulant inflammation composite polyurethane
  • 相关文献

参考文献10

  • 1Jung IK, Bae JW, Choi WS, et al. Surface graft polymerization of poly (ethylene glycol) methacrylate onto polyurethane via thiol-ene reaction: preparation and characterizations [J]. J Biomater Sci Polym Ed, 2009, 20(10) :1473 - 1482.
  • 2Xie Xingyi, Wang Ruifang, Li Jiehua, et al. Fluorocarbon chain end-capped poly ( carbonate urethane) s as biomaterials: blood compatibility and chemical stability assessments [ J ]. J Biomed Mater Res B Appl Biomater, 2009, 89 ( 1 ) : 223 - 241.
  • 3Yuan Jiang, Lin Sicong, Shen Jian. Enhanced blood compatibility of polyurethane functionalized with sulfobetaine [J]. Colloids Surf B Biointerfaces, 2008, 66( 1 ) :90 -95.
  • 4Fedel M, Motta A, Maniglio D, et al. Surface properties and blood compatibility of commercially available diamondlike carbon coatings for cardiovascular devices [ J ]. J Biomed Mater Res B Appl Biomater, 2009, 90 ( 1 ) : 338 - 349.
  • 5Sin Dong-Choon, Kei Ho-Lun, Miao Xigeng. Surface coatings for ventricular assist devices [ J]. Expert Rev Med Devices, 2009, 6(1):51-60.
  • 6Lousinian S, Logothetidis S, Laskarakis A, et al. Haemocompatibility of amorphous hydrogenated carbon thin films, optical properties and adsorption mechanisms of blood plasma proteins [ J]. Biomol Eng, 2007, 24 (1):107- 112.
  • 7Alanazi A, Nojiri C, Noguchi T, et al. Improved blood compatibility of DLC coated polymeric material [ J ]. ASAIO J, 2000, 46(4) :440 -443.
  • 8Feng Li, Andrade JD. Protein adsorption on low-temperature isotropic carbon: I. Protein conformational change probed by differential scanning calorimetry [ J ]. J Biomed Mater Res, 1994, 28(6) : 735 -743.
  • 9Feng Li, Andrade JD. Protein adsorption on low temperature isotropic carbon. III. Isotherms, competitivity, desorption and exchange of human albumin and fibrinogen [ J ]. Biomaterials, 1994, 15 (5) : 323 - 333.
  • 10Webster TJ, Waid MC, McKenzie JL, et al. Nano-biotechnology:carbon nanofibres as improved neural and orthopaedic implants [ J]. Nano Tech, 2004, 15 ( 1 ) :48 - 56.

同被引文献68

引证文献5

二级引证文献13

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部