期刊文献+

T6热处理对变形AZ91D镁合金的强化作用 被引量:6

Intensification Effect of T6 Heat Treatment on Deformed AZ91D Alloy
下载PDF
导出
摘要 对热压缩变形的AZ91D镁合金进行T6热处理(410℃×3 h固溶,分别在150、170、190℃时效16 h)。结果表明:T6热处理大大提高了合金的强度和硬度,但降低了塑性;190℃的时效强化效果较好。 T6 heat treatment of solution at 410 ℃ for 1 h,and aging at 150 ℃,170 ℃,190 ℃ for 16 h of AZ91D alloy after hot compression were carried out.The results show that the strength and hardness of the alloy improve largely by T6 treatment,but the deformability decreases.The better intensification effect can be obtained when aging at 190 ℃.
出处 《热加工工艺》 CSCD 北大核心 2010年第16期136-137,165,共3页 Hot Working Technology
基金 国家自然科学基金资助项目(50605059) 山西省青年科学基金资助项目(20051025) 山西省国际科技合作资助项目(2009081012) 国家自然科学基金重点资助项目(50735005) 山西省高等学校优秀青年学术带头人支持计划基金资助项目
关键词 AZ91D镁合金 压缩变形 T6热处理 AZ91D alloy hot compression T6 heat treatment
  • 相关文献

参考文献3

二级参考文献7

  • 1吉泽升.日本镁合金研究进展及新技术[J].中国有色金属学报,2004,14(12):1977-1984. 被引量:43
  • 2Raymondfd. Renaissance in magnesium association561h annual world conference [J]. Light Metal Age, 1999, (7/8): 64-69.
  • 3卫英慧,许并社.镁合金腐蚀防护的理论与实践[M].北京:冶金工业出版社,2008.
  • 4Duly D, Zhang W Z,Audier M. High resolution electron microscopy observations of the interface structure of continuous precipitates in a mg-al alloy and interpretation with the o-lattice theory[J]. Phil. Mag. A, 1995,(71):187-204.
  • 5Crawley A F, Milliken K S. Precipitate morphology and orientation relationship in an aged mg-9%a1-1%zn-0.3%mn alloy [J]. Acta Metall, 1974, 22:557-562.
  • 6Blandin J J. Optimisation of mechanical properities of an AZ91 alloy by microstructure control [J]. Materials Science Forum, 2003,426-432 : 551-556.
  • 7杨忠旺,陈振华,夏伟军,陈鼎.AZ91镁合金型材挤压工艺研究[J].矿冶工程,2008,28(3):99-101. 被引量:9

共引文献10

同被引文献75

引证文献6

二级引证文献47

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部