期刊文献+

微量钛对低碳硼钢冲击韧性的影响 被引量:8

The effect of tiny amount of Titanium on the notch toughness of low carbon boron steel
下载PDF
导出
摘要 研究了微量钛对低碳硼钢冲击韧性的影响.结果表明:在-60℃~+20℃范围内,加入微量钛的低碳硼钢的冲击韧性普遍较好,随着温度升高,冲击韧性值增大,但其冲击韧性值变化幅度不大.在-60℃~+20℃范围内,必须的钛含量超出时,这些过剩的钛对低碳硼钢的冲击韧性没有明显影响. The effect of tiny amount of Titamium on the notch toughness of low carbon boron steel was investigated. The results show that in the temperature ranging from -60℃ to +20℃,the notch toughness of low carbon boron steel with addition of tiny amount of Titanium is generally good, and increases slowly with temparature. When the Titanium addition surpasses certain level, the surplus amount of Titanium has no obvious further inffluence on the notch toughness of the steel. No negative effect of this extra amount Titanium on the notch toughness of the steel was observed.
出处 《西安建筑科技大学学报(自然科学版)》 CSCD 1999年第1期70-72,76,共4页 Journal of Xi'an University of Architecture & Technology(Natural Science Edition)
基金 冶金工业部"有偿与资助
关键词 低碳硼钢 微量钛 冲击韧性 low carbon boron steel, minor amount of Titanium, notch toughness
  • 相关文献

参考文献1

  • 1钟一谔.转子系统动力学[M].北京:清华大学出版社,1987.87-96.

共引文献1

同被引文献51

引证文献8

二级引证文献65

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部