摘要
通过对电沉积非晶态ＮｉＰ合金镀液组成和镀层性能的稳定性进行研究，了解到对镀层质量影响最大的因素是镀液的ｐＨ值，其次是［Ｈ３ＰＯ３］；找出了稳定镀液组成和镀层质量的有效措施，即采用一定面积比例的ＤＳＡ和Ｎｉ混合阳极，调整好镀液的ｐＨ值，适当加入稳定剂和降低镀液的［Ｃｌ－］，定时定量地添加Ｈ３ＰＯ３．
The stability of coating characteristics and solution components in the amorphous Ni P alloy plating was studied. It was found that the most significant factor on Ni P coating was pH of solutions and the second was [H 3PO 3], and that we can keep the coatings and solutions stable in Ni P alloy plating process by using DSA and Ni mixing anodes, reducing , adding stabilizer and H 3PO 3 properly and regularly.
出处
《中南工业大学学报》
CSCD
北大核心
1999年第2期157-161,共5页
Journal of Central South University of Technology(Natural Science)
基金
国家自然科学基金
