摘要
通过对仅与框架梁连接的两边连接钢板剪力墙在往复荷载作用下的试验,探讨了其滞回特征和耗能能力.结果表明该类剪力墙具有较高的初始刚度和承载力,受荷后期沿对角线形成拉力带,利用屈曲后性能承担荷载并耗能,具有稳定的耗能能力,延性系数超过5.0,符合现行国家规范的设计要求.采用有限元分析方法研究了钢板高厚比和跨高比对骨架曲线的影响,提出了便于应用的骨架曲线简化模型和计算方法.
The steel plate shear wall with two-side connections,only connected with boundary frame beams,was tested under cyclic loading to discuss its hysteresis property and energy dissipating capacity.The results show that the shear wall has high initial stiffness and strengtht;hat will diagonal tensile field formed at the later loading stage,the shear wall sustain lateral load and dissipate energy due to its post-buckling capacity;that the ductility coefficient of the shear wall is over 5.0,which meets the requirment of the current Chinese design codes.In addition,the finite element method（FEM）was used to study the influence of height-to-thickness ratio and length-to-height ratio on the skeleton curve.The simplified model and design methods to predict the skeleton curve were put forward for practical application.
出处
《天津大学学报》
EI
CAS
CSCD
北大核心
2010年第8期697-704,共8页
Journal of Tianjin University(Science and Technology)
基金
国家自然科学基金资助项目(5047809
50808053)
国家"十一五"科技支撑计划资助项目(2006BAJ01B02-02-03)
黑龙江自然科学基金重点项目(ZJG0701)
关键词
两边连接钢板剪力墙
往复荷载试验
耗能能力
有限元方法
简化模型
steel plate shear wall with two-side connections
cyclic loading test
energy dissipating capacity
finite element method
simplified model
