摘要
研究了影响热硫化硅橡胶与合金铝粘合剪切强度的几个因素。结果表明：表面处理方法、工艺条件、硅烷偶联剂和环境湿度等不同程度影响硅橡胶与合金铝粘合剪切强度。红外线辐照处理和硅烷偶联剂对剪切强度有较大贡献、较低的环境湿度有利于提高剪切强度。
The factors of influence on shear strength of heat curing silicone rubber/aluminum alloy were studied. The results showed that surface treatment, technological condition, silane coupling agent and environment humidity had different effcts on shear strength of silicone rubber/aluminum alloy. The infrared radiation and silane couple agent made more contributes to shear strength and the low environment humidity was benefical to the increase of shear strength.
出处
《特种橡胶制品》
北大核心
1999年第2期46-51,共6页
Special Purpose Rubber Products
关键词
甲基乙烯基
硅橡胶
强度
橡胶
合金
粘接
methl vinyl silicone rubbershear strengthsurface treatmetttechnological conditionsilane coupling agentenvironment humidity
