期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

Carbonates as Foaming Agent in Chip-based Aluminium Foam Precursor 被引量：3

Carbonates as Foaming Agent in Chip-based Aluminium Foam Precursor
原文传递
导出
摘要 Replacement of TiH2 as foaming agent by CaCO3（lime） and CaMg（CO3）2（dolomite） for AlMg4.5-and AlSi9Cu3-foams was investigated considering inluences on foaming capability and cellular structure.Precursor materials were produced from alloy chip and powder mixtures by means of the thixocasting process.AlSi9Cu3 variants showed expansion levels suffcient for commercial use.Variations in expansion observed when CaCO3 and CaMg（CO3）2 were compared as foaming agent are explained based on the course of decomposition.Improved performance of dolomite-based foams relies on formation of stabilizing MgO phases,which do not develop during decomposition of CaCO3 in Al-Si-Cu alloys Replacement of TiH2 as foaming agent by CaCO3（lime） and CaMg（CO3）2（dolomite） for AlMg4.5-and AlSi9Cu3-foams was investigated considering inluences on foaming capability and cellular structure.Precursor materials were produced from alloy chip and powder mixtures by means of the thixocasting process.AlSi9Cu3 variants showed expansion levels suffcient for commercial use.Variations in expansion observed when CaCO3 and CaMg（CO3）2 were compared as foaming agent are explained based on the course of decomposition.Improved performance of dolomite-based foams relies on formation of stabilizing MgO phases,which do not develop during decomposition of CaCO3 in Al-Si-Cu alloys
作者 Marco Haesche Dirk Lehmhus Jrg Weise Manfred Wichmann Irene Cristina Magnabosco Mocellin
机构地区 University of Bremen Fraunhofer IFAM Federal University of Santa Catarina
出处 《Journal of Materials Science & Technology》 SCIE EI CAS CSCD 2010年第9期845-850,共6页 材料科学技术（英文版）
关键词 Aluminium foam Foaming agent Calcium carbonate DOLOMITE Stabilisation Aluminium foam Foaming agent Calcium carbonate Dolomite Stabilisation
分类号 TQ133.1 [化学工程—无机化工]
  • 相关文献

参考文献19

  • 1P. Schafdler, C.D. Hanko, H. Mitterer and P. Zach: Alulight Metal Foam Products, in Proc. of the 5th Int. Conf. on Porous Metals and Metallic Foams, eds. L.P. Lefebvre, J. Banhart and D.C. Dunand, DEStech Publications, Inc., Lancaster, 2008, 7.
  • 2J. Baumeister, G. Rausch, K. Stobener, D. Lehmhus and M. Busse: Materialwiss. Werkstofftech., 2007, 38, 939.
  • 3J. Baumeister and D. Lehmhus: Commercially Available Products Made of PM Aluminium Foams--Status and Prospects, in Proc. of the 3rd Int. Conf. on Cellular Metals and Metal Foaming Technology, eds. J. Banhart, N. Fleck and A. Mortensen, MIT-Verlag, Berlin, 2003, 13.
  • 4D. Lehmhus, J. Buumeister, M. Haesche, K. Stobener, J. Weise, D. Lunge and N. Meyer: Aluminium Alloys- Their Physical and Mechanical Properties, in Proc. of the 11th Int. Conf. on A1uminium Alloys ICAA11, eds. J. Hirsch, B. Skrotski and G. Gottstein, Vol. 2, Wiley-VCH Verlag, 2009, 2180.
  • 5N. Kanetake, S.-Tsudaand M. Kobashi: Foaming Behavior of Aluminum Precursor Produced from Machined Chip Waste, in Proc. of the 5th Int. Conf. on Porous Metals and Metallic Foams, eds. L.P. Lefebvre, J. Banhart and D.C. Dunand, DEStech Publications, Inc., Lancaster, 2008, 63.
  • 6L.E.G. Cambronero and C. Ranninger: Marble Waste Recovery as Foaming Agent for Aluminium Foams, in Proc. of the 3rd Int. Conf. on Cellular Metals and Metal Foaming Technology, eds. J. Banhart, N. Fleck and A. Mortensen, MIT-Verlag, Berlin, 2003, 175.
  • 7L.E.G. Cambronero, J.M. Ruiz-Roman, F.A. Corpas and J.M.R. Prieto: J. Mater. Process. Technol., 2009, 209, 1803.
  • 8M. Haesche, M. Heuser, D. Lange, N. Meyer, J. Baumeister and J. Weise: Metall., 2006, 60- 542.
  • 9A. Byakova, A. Sirko, K. Mykhalenko, Y. Milman, S, Gnyloskurenko and T. Nakamura: Porous Metals and Metal Foaming Technology, eds. H. Nakajima and N. Kanetake, The Japan Institute of Metals, Sendai, 2006, 273.
  • 10V. Gergely, D.C. Curran, T.W. Clyne: Compos. Sci. Technol., 2003, 63, 2301.

同被引文献23

  • 1陈启斌,马宝歧,倪炳华.泡沫凝胶性质的几种影响因素[J].华东理工大学学报（自然科学版）,2007,33(1):71-74. 被引量：24
  • 2焦念友.“泡沫酸化油层工艺技术研究”应用前景广阔[J].中国石油大学学报（自然科学版）,2007,31(2):68-68. 被引量：1
  • 3He XQ, et al. Classification technique for danger classes of coal and gas outburst in deep coal mines[J]. SafetyScienc, 2010, 48(2).. 173-178.
  • 4何学秋.中国煤矿灾害防治理论与技术[M].徐州:中国矿业大学出版社,2008.
  • 5Mil!er MJ, et al. Aging c ioane,' L, el used for subsur- face permeability re&ction[J]. Jo,Jrnal of Collc Interface Science, 19 9,5 ,, 17 5 ( 1 ) : 88-96.
  • 6Iglesias MJ, et al. Compositional and structural chan- ges during aerial oxidation of coal and their relations with technological properties[-J]. Vibrational Spectros- copy, 1998, 17(1):41-52.
  • 7Nakorn W, et al. Effect of pre-oxidation at low temper- ature on the carbonization behavior of coal[-J]. Fuel, 2002, 81(14).. 1477-1484.
  • 8Tafreshi AM, Marzo MD. Foams and gels as fire pro- tection agents [J]. Fire Safety Journal, 1999, 33 (4) .. 295-305.
  • 9Retuert J, et al. Highly porous silica networks derived from gelatin siloxane hybrids prepared starting from so- dium metasilicate [J]. Journal of Non-Crystalline Sol-ids, 2004, 347(1-3): 273-278.
  • 10梁运涛,罗海珠.中国煤矿火灾防治技术现状与趋势[J].煤炭学报,2008,33(2):126-130. 被引量：214

引证文献3

二级引证文献11

Journal of Materials Science & Technology
2010年 第9期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部