摘要
用一台IPC机实现一条模拟加工自动线的自动控制及模拟显示,采用了两个光电开关和十二个接近开关以及一个软按钮作为输入量.软件设计时采用了四个程序模块分别对输送带电机及工位1、工位2、工位3的电机进行控制.
The application of IPC, has realized the autornatic and simulant display for a simulant mechanical processing autornaic line. There are 2 phooelectric switches, 12 near switches and a soft buttom as the input qUanities of this systern. In progranuning,4 program modules were designed to control respective1y the 4 motors of transmision strap, wok station 1, work station 2 and wok station 3.
出处
《常熟高专学报》
1999年第2期105-107,共3页
Journal of Changshu College
关键词
模拟显示
机械加工
程序设计
自动控制
自动线
IPC, strategy designer windows, display designer windows, program medules