摘要
SiC nanoparticles reinforced eutectic Sn-Pb solder were prepared by mechanical mixing method. Reactive wetting of the resultant composite solders on Cu substrates was investigated using real time, in-situ visualization of the triple-line movement. It was found that spreading rates of all solder pastes in this work do not obey Tanner' s law of non-reactive spreading. SiC nano-particles slow down both the pre-melting and post-melting spreading rates of composite solder pustes. As the content of SiC nano-particles increase, the melting point of composite solders decrease, and the spreading time of molten composite solder pastes increases.
SiC nanoparticles reinforced eutectic Sn-Pb solder were prepared by mechanical mixing method. Reactive wetting of the resultant composite solders on Cu substrates was investigated using real time, in-situ visualization of the triple-line movement. It was found that spreading rates of all solder pastes in this work do not obey Tanner' s law of non-reactive spreading. SiC nano-particles slow down both the pre-melting and post-melting spreading rates of composite solder pustes. As the content of SiC nano-particles increase, the melting point of composite solders decrease, and the spreading time of molten composite solder pastes increases.