摘要
为确定内核材料对PELE弹丸横向效应的影响,进行了内装聚乙烯、聚碳酸酯、聚四氟乙烯、聚丙烯、聚氨酯材料的横向效应弹丸(PELE)对4层间隔靶的侵彻试验,获得了不同方案PELE弹对主靶的穿孔孔径、间隔后效靶面的破片分布.实验结果表明,聚四氟乙烯作内核材料的PELE弹穿靶后形成的破片数和飞散角明显大于其它材料;PELE弹穿靶后形成的破片飞散角在主靶有一定斜置角时增大.
To study the influence of filling material on lateral effect of penetrator with enhanced lateral efficiency(PELE), the experiments of penetrating into four layered target by a steel shell PELE filling with different cores: polyethylene, polycarbonate, teflon, polypropylene and polyurethane penetrate, were carried out. The perforating diameters of main armor and fragments distributions on witness target were obtained in correspondence with different cores. The experiments demonstrate that PELE with teflon core can generate more fragments and spread a larger dispersion angle. The fragment dispersion angle of PELE increases once the main armor is in a position with 38° oblique angle to the ground.
出处
《北京理工大学学报》
EI
CAS
CSCD
北大核心
2010年第9期1009-1012,共4页
Transactions of Beijing Institute of Technology
基金
国家教育部高等学校博士学科点专项科研基金资助课题(20070007026)
国家重点实验室自主课题资助(YBKT09-03)