期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

CAD/CAM锆瓷冠在后牙种植修复中的临床应用 被引量：3

The application of Zirconia all-ceramic crowns manufactured by CAD/CAM in the posterior teeth's implant-supported prostheses
下载PDF
导出
摘要 目的:探讨CAD/CAM锆瓷冠在后牙种植体修复的临床应用。方法:选取ITI种植术后病例30例,采用CAD/CAM全瓷冠修复,3年后复查,对修复效果进行评价。结果:经6-36个月随访观察发现1例饰瓷脱落外,其余修复体均正常:全冠的形状、颜色与邻牙相协调,全冠修复体未见有明显磨耗,冠颈缘与基台密合度良好,近远中邻接面接触关系正常,龈周组织正常,未见有破损与脱落,修复成功率为97%,效果满意。结论:CAD/CAM锆瓷冠在后牙种植修复中的临床应用效果良好,值得推广。 Objective：The aim of this retrospective study was to evaluate the clinical effectiveness of the all ceramic crown by CAD/CAM.in the posterior teeth＇s implant manufactured.Methods：Thirty restorations of ITI implant were involved in the study.To evaluate the applied effect of restorations they were followed up for 3 years.Results：Through three years clinical observations to find 29 cases were satisfactory,only 1 case appeared porcelain dropped.Conclusions：CAD/CAM system offers easy and quick manufacture of restorations,and the clinical effect was satisfactory.
作者 汪振华 王媛媛 王建青 李珂 侯宏亮 王新平
机构地区 乌鲁木齐市口腔医院
出处 《口腔颌面修复学杂志》 2010年第3期178-180,共3页 Chinese Journal of Prosthodontics
基金 新疆乌鲁木齐市科技局课题(项目编号:Y30902)
关键词 种植体 CAD/CAM 全瓷冠 implant CAD/CAM Zirconia all-ceramic crown.
分类号 R783.2 [医药卫生—口腔医学]
  • 相关文献

参考文献11

  • 1陈悦,黎红,赵云凤,梁星.Cerec 2型机摄像头的口外控制装置对CAD/CAM全瓷底层冠适合性的影响[J].华西口腔医学杂志,2005,23(3):247-250. 被引量：11
  • 2Bindl A,M rmann WH.Fit ofall-ceramic posterior fixed partial denture framworks in vitro[J].Int J Periodontics Restorative Dent,2007,27(6):567-575.
  • 3Ardlin B I.Transfomation-toughened zirconia for dental inlays,crowns and bridges:chemical stability and effect of low-temperature aging on flexural strengh and surface[J].Dent Mater,2002,18(8):590-595.
  • 4Ttmtiprawon M,Wilson PR.The effect of cement thickness on the fracture strengenth of all-ceramic crowns[J].Aust Dent J,1995,40(1):17-21.
  • 5孙强,何天鹏,韩东,张芳.非均匀的粘结剂层的厚度对全瓷冠应力分布的影响[J].口腔颌面修复学杂志,2006,7(3):181-184. 被引量：13
  • 6吴艳玲,张修银.CAD/CAM全瓷修复体抗折性研究进展[J].口腔颌面修复学杂志,2009,10(3):181-185. 被引量：13
  • 7Kaarel A Proos,Michael V Swain,Jim Ironside,et al.Influence of Core Thickness on a Restored Crown of a First Premolar Using Finite Element Analysis[J].Int J Prosthodont Dent J,1995,40(1):17-21.
  • 8Brian R Lawn,Antonia Pajares,Yu Zhang.Materials design in the performance of all-ceramic crowns[J].J Biomaterials,2004,40(25):2885-2892.
  • 9Reiss B,Walther W.Clinical long-term results and 10year Ka-plan-Meier analysis of Cerec restorations[J].Int J Comput Dent,2000,3(1):9-23.
  • 10Posselt A,Kerschbaum T.Longevity of 2328 chairside Cerec inlays and onlays[J].Int J Comput Dent,2003,6(3):231-248.

二级参考文献60

  • 1谢海峰,章非敏,陈晨,袁秀祥.纳米硅涂层对玻璃渗透氧化铝陶瓷粘结强度的影响[J].临床口腔医学杂志,2006,22(7):410-412. 被引量：5
  • 2孙强,何天鹏,韩东,张芳.非均匀的粘结剂层的厚度对全瓷冠应力分布的影响[J].口腔颌面修复学杂志,2006,7(3):181-184. 被引量：13
  • 3黄勇,路学成,余军.氧化铝陶瓷增韧研究进展[J].江苏陶瓷,2007,40(2):11-15. 被引量：14
  • 4李明哲,王威,赵云凤.VITA In-Ceram ALUMINA陶瓷结构及性能研究[J].临床口腔医学杂志,2007,23(4):216-217. 被引量：3
  • 5Irena Sailer, Aurel Feher, Frank Filser, et al. Prospective clinical study of zirconia posterior fixed partial dentures: 3-year follow-up[J]. Quintessence Int, 2006, 37 : 685-693
  • 6Fischer H, Weber M, Marx R. Lifetime prediction of all-ceramic bridges by computational methods[J]. Dent Res, 2003, 82(3): 238-242
  • 7Quinn JB, Sundar V, Lloyd IK. Influence of microstructure and chemistry on the fracture toughness of dental ceramics [J]. DentMater, 2003, 19(7): 603-611
  • 8Wolf WD, Vaidya K J, Francis LF. Mechanical properties and failure analysis of alumina-glass dental composite[J]. J Am CeramSoc, 1996, 79(9): 1769-1776
  • 9Krejci, I. Wear of ceramic and other restorative materials. International Symposium on Computer Restorations [J]. Quintessence, 1991, 245-251
  • 10Andersson M, Oden A. A new all ceramic crown!A dense-sintered, high-purity alumina coping with porcelain [J]. ActaOdontScand, 1993, 51:59-64

共引文献32

同被引文献25

引证文献3

二级引证文献13

口腔颌面修复学杂志
2010年 第3期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部