期刊文献+

齿轮传动疲劳点蚀失效的试验研究 被引量:2

Experimental Research on Fatigue Pitting Failures of Gear Transmission
下载PDF
导出
摘要 应用齿轮试验机进行齿轮传动疲劳点蚀试验,研究齿轮疲劳寿命的分布类型,确定分布参数,并计算可靠度及可靠寿命;建立齿轮传动系统中疲劳点蚀故障的随机过程模型,研究齿轮疲劳点蚀故障的分布特征、趋势特征。结果表明:齿轮疲劳寿命为对数正态分布;齿轮疲劳点蚀失效首先是一个更新过程,通过进一步的检验分析,其寿命特征没有呈现出增大的趋势,即齿轮故障模型不是一个非时齐的泊松过程,通过验证,该过程为时齐泊松过程。 The fatigue pitting failures experiments of gear transmission was carried out using the gearing testing machine. The distribution type and distribution parameters of fatigue life of gears were studied. The reliability and the life were calculated. Failure random processing modal of fatigue pitting gear system was built, the distribution characteristics, the tendency of fatigue pitting of gear life span were studied. The results show that fatigue life of gears fits the log-normal Gaussian distribution. The pitting failure model of gear is renewal process. The additional analysis shows that the service life of gear indicates no increase trend and is not a process of non-homogeneous Poisson, but a process of homogeneous Poisson.
出处 《润滑与密封》 CAS CSCD 北大核心 2010年第10期22-24,27,共4页 Lubrication Engineering
基金 辽宁省教育厅科学研究计划项目(L2010463)
关键词 齿轮传动 疲劳点蚀 可靠度 更新过程 时齐泊松过程 gear transmission fatigue pitting reliability renewal process homogeneous Poisson process
  • 相关文献

参考文献9

  • 1Jussi K Vaurio. Uncertainties and quantification of common cause failure rates and probabilities for system analyses[ J ]. Reliability Engineering and System Safety,2005, 90 : 186 - 195.
  • 2Committee E-9 on Fatigue. A Guide for Fatigue Testing and the Statistical Analysis of Fatigue Data [ M ]. American Society for Testing and Materials in Philadelphia,1963.
  • 3Bosc Jean-Marc, Guo Yifan, Sarihan Vijay, et al. Accelerated life testing for micro-machined chemical sensors [ J ]. IEEE Transactions on Reliability, 1998,47 : 135 - 141.
  • 4CONRYTF,SEIREGA. A mathematieal programming technique for the evaluation of load distribution and optimal modifieations for gear system[J]. Trans of ASME, 1973,35 : 1115 - 1122.
  • 5曹晋华,程侃著.可靠性数学引论[M].北京:高等教育出版社,2005.
  • 6张玉斌,李波.天然气发电机组耐磨可靠性研究[J].石油工业技术监督,2006,22(10):31-34. 被引量:1
  • 7Hollander M, Wolfe D A. Nonparametrie Statistical Methods [M]. 2nd Ed. New York:John Wiley and Sons,Inc. ,1973.
  • 8Lewis P A W, Robinson D. Testing for a monotone trend in a modulated renewal analysis [M]// Proschan F, Serfing R J. Relability and Biometry. Philadelphia Pennsylvania, SIMA, 1974.
  • 9Proschan F. Theoretical explanation of observed descreasing failer rate [ J ]. Teehnometrics, 1963,5 ( 3 ) :375 - 383.

二级参考文献2

共引文献7

同被引文献45

  • 1高镇同,熊峻江.疲劳/断裂可靠性研究现状与展望[J].机械强度,1995,17(3):61-82. 被引量:64
  • 2江龙平,徐可君.疲劳裂纹三维动态扩展灰色系统预测[J].机械工程学报,2006,42(1):86-89. 被引量:12
  • 3邓聚龙.灰色控制系统.华中工学院学报,1982,:9-18.
  • 4Palmgren A. Die lebensdauer yon kugellargern [ J]. Z Vereines duetsher lng, 1924, 68(4) : 339-341.
  • 5Weibull W. A statistical theory of the strength of materials [ J]. IVA Handlingar, 1939, 151(151): 1-8.
  • 6Tallian T. Weibull distribution of rolling contact fatigue life and deviations there from[J]. ASLE Trans, 1962, 5(1) : 183-196.
  • 7Lundberg G, Palmgren A. Dynamic capacity of roller bearings [ J ]. Acta Polytechnica Scandinavica-Mechanical Engineering Series, 1952, 2(4) : 96-127.
  • 8Shimizu S. P--S--N curves model for rolling contact machine elements [ C ]//Proceedings of JAST Tribology Conference. Kawasaki: Japan Science and Technology Agency, 2000: 1767- 1772.
  • 9Palmgren A. On the carrying capacity and life of ball bearings [ J], Journal Bearings VS Ball Bearings, 1937, 3: 34-44.
  • 10Ioannides E, Harris T E. A new fatigue life model for rolling bearings [ J]. ASME Journal of Tribology, 1985, 107 (3) : 367- 378.

引证文献2

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部