期刊文献+

Yb:Y_2O_3纳米粉体及陶瓷的制备和性能 被引量:1

Preparation and Properties of Yb:Y_2O_3 Nanopowders and Ceramic
原文传递
导出
摘要 以Y2O3和Yb2O3为原料,采用柠檬酸溶胶-凝胶法制备了Yb:Y2O3纳米粉体,将该粉体成型后在1500℃烧结7 h获得Yb:Y2O3陶瓷。XRD测试结果表明,Yb:Y2O3纳米粉体的合成温度为800℃。扫描电镜分析表明,Yb:Y2O3粉体的平均直径为40 nm左右。差热-热重分析表明,Yb:Y2O3纳米前驱粉体中柠檬酸和硝酸等在300℃左右分解。荧光光谱分析发现Yb:Y2O3陶瓷的最强荧光发射峰位于1030 nm,是Yb3+的2F7/2-2F5/2谱项导致的荧光发射。 The Yb:Y2O3 nanopowders were prepared by citric acid sol-gel method,and Y2O3 and Yb2O3 were used as raw materials.The Yb:Y2O3 ceramic was obtained when Yb:Y2O3 nanopowders were molded and then calcined at 1500 ℃ for 7 h.The XRD test showed that the temperature of synthesis of Yb:Y2O3 nanopowders was 800 ℃.The SEM analysis indicated that the average diameter of the Yb:Y2O3 powders was about 40 nm.The TG-DTA analysis revealed that the citric acid and nitric acid of Yb:Y2O3 precursor was decomposed at 300 ℃.The fluorescence spectrum analysis indicated that the strongest fluorescence peak of Yb:Y2O3 ceramic was at 1030 nm,that was 2F7/2-2F5/2.
出处 《中国稀土学报》 CAS CSCD 北大核心 2010年第5期560-563,共4页 Journal of the Chinese Society of Rare Earths
关键词 Yb:Y2O3 纳米粉体 溶胶-凝胶法 稀土 Yb:Y2O3 nanopowders sol-gel method rare earths
  • 相关文献

参考文献11

二级参考文献129

共引文献94

同被引文献13

  • 1庞子瑞,李健壮,蔡光起.基于超高速磨削的CBN砂轮特性选择[J].工具技术,2007(7):13-16. 被引量:7
  • 2郑伟宏,程金树,全健,王洪成,楼贤春.Y_2O_3掺杂CaO-Al_2O_3-SiO_2系微晶玻璃的研究[J].玻璃与搪瓷,2007,35(1):1-5. 被引量:6
  • 3Tawakoli T, Tavakkoli S J. High-efficiency deep grinding (HEDG) of inconel and materials conference superabrasive'91 [ C]. Chicago: SME-Technical Paper MR91-163, 1991.
  • 4Jackson M J, Davis C J, Hitchiner M P, Mills B. High-speed grinding with CBN grinding wheels-applications and future technology [J]. Journal of Materials Processing Technology, 2001, (110) : 78.
  • 5Norihiro Funayama, Junichi Matsuda. Development of high-performance CBN and diamond grinding wheels for high-speed grinding [ J ]. New Diamond and Frontier Carbon Technology, 2005, (4) :173.
  • 6Bailey M W, Juchem H O. The advantages of CBN grinding: low cutting forces and improved workpiece integrity [ J ]. IDR, 1998, (3) : 83.
  • 7Daniela Herman, Jan Krzos. Influence of vitrified bond structure on radial wear of CBN grinding wheels [J]. Journal of Materials Processing Technology, 2009, (209) : 5377.
  • 8麦克米伦PW 王仞干译.微晶玻璃[M].北京:中国建筑工业出版社,1988..
  • 9苏春辉,端木庆铎,王艳,肖璇,隋智通.稀土氧化物在Al_2O_3透明陶瓷晶界浓度分布的非平衡态热力学分析[J].硅酸盐学报,1998,26(6):802-807. 被引量:8
  • 10金怀东,向卫东,梁晓娟,黄海宇,华伟,董永军.铈、钐掺杂YAG微晶玻璃制备及光谱性能[J].中国稀土学报,2011,29(3):331-336. 被引量:7

引证文献1

二级引证文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部