基于单片机控制的动态舰模电路设计与研究

Single-Chip Computer Based the Dynamic Ship Model of Steering Device Design and the Research of Circuit

为提高无线电遥控技术,在数字编码电路中运用CIC9187 DTMF编码器输出16组编码脉冲,并通过MT8870 DTMF译码器将串行脉冲转变成四位二进制码输出。借用无线电发射接收组件F36-F/J,传送到受控端,再通过61单片机对控制信号作译码处理,控制相应的船模动作的驱动电路,驱动模型的制动机械进行工作,从而达到对船体动作的控制。

In order to improve radio control technology,this paper utilizes digital encoding circuit,which will output 16 group coded pulse by using the CIC9187 DTMF encoder,and transform serial pulse into a 4-bit binary code output through MT8870 DTMF decoder.We use radio control chips F36-F/J,and transfer to the controlled terminal,then handle the controlled signals for the decoding process through 61 single computer chip,control the mechanic movement of the ship model by controlling the driving circuit,so as to achieve the control action on the hull.