升降机球铁件铸造工艺方案的模拟优化设计
Solidification Simulation-Optimized Design Casting Method for Nodular Iron Lifter Casting
出处
《铸造技术》
CAS
北大核心
2010年第10期1383-1385,共3页
Foundry Technology
参考文献6
-
1D M Lipinski,W Schafer,E Flender."Numerical Modelling of the Fi1ling Sequence and Solidification of Castings" in Modeling of Casting,Welding and Advanced Solidification Processes,ed.T Piwonka,V Voller,L Katgerman.TMS,1993,S:389-397.
-
2D M Lipinski,W Schfer,S Andersen."Numerical Modelling of the Fi1ling Sequence and Solidification and Thermal Stresses of Castings" im Tagungsband der IMACS,1997,Berlin.
-
3R Aagaard."Ductile Iron-Solidification Shrinkage Simulation".Ph D thesis/Fellowship Publication №.TM 97.42.1997.
-
4P N Hansen,R Aagaard,I L Svensson,et al.Simulation of mould filling,solidification and feeding of ductile iron test castings[J].AFS.Special Report for the 96th Casting Congress.
-
5H Frederiksson,I L Svensson.In:Proceedings of Physical Mettalurgy of Cast Iron IIl,MRS,P:273-284.
-
6W O1dfield.In:ASM Transactions,vo1.59,19966,P:945.
-
1黄丽秀,周以瑞.升降机齿条断裂问题研究[J].民营科技,2010(9):18-18. 被引量:1
-
2升降机导轨的固定装置:CN1460633 [专][J].起重运输机械,2005(5):72-72.
-
3李宏兴,焦玉胜.解决油缸渗漏缺陷的铸造工艺方案[J].铸造,2010,59(5):516-517. 被引量:1
-
4黄宜平.Z35摇臂钻床升降机构壳体的粘接修复[J].粘接,1994,15(5):29-30.
-
5Richard hagaard,Wilfried Schafer,Erik Hepp,Christian Kleeberg,Jan Franke,余永吉.球铁升降机铸件铸造工艺计算机模拟优化设计[J].现代铸铁,2010,30(2):82-85. 被引量:2
-
6丁鹏超.升降机的工作原理——以数控卧式镗铣床刀库机械手为例[J].时代农机,2015,42(3):64-65. 被引量:1
-
7李佳佳.轧机防缠导板优化设计及控制策略研究[J].机械工程师,2015(9):260-261. 被引量:3
-
8冯仁杰,彭定军.汉钢新建棒材生产线工艺与设备简介[J].四川冶金,2014,36(3):16-20.
-
9张建峰,姜峰,贾洪仁.风电塔筒升降机传动部分圆弧齿条的工艺设计与性能仿真[J].铸造技术,2011,32(1):104-107. 被引量:2
-
10宋亮,张屹林,闫汝辉,王海涛.基于数值模拟的铝合金活塞设计与优化[J].特种铸造及有色合金,2015,35(2):150-152. 被引量:4