摘要
用载波钝化方法控制AZ91D镁合金锡酸盐转化膜成膜过程,用扫描电镜(SEM)观察该转化膜的表面形貌,用极化曲线和电化学阻抗谱研究载波钝化对该转化膜耐蚀性能的影响。结果表明,载波钝化使AZ91D镁合金表面生成一层颗粒直径略大于传统浸泡处理的锡酸盐转化膜,其耐蚀性能显著提高。
By using alternating current（AC） modulated passivation technique,the formation process of stannate conversion coating could be controlled.The microstructure morphology of the conversion coating was observed by scanning electron microscopy.Polarization curves and electrochemical impedance spectra（EIS） were examined to understand the effect of the AC passivation on the corrosion resistance of the conversion coating.The experimental results revealed that the surface of AZ91D magnesium alloy after the AC passivation was covered by the hemispherical particles whth larger size than that for traditional immersion conversion coating（imm-CC）.The corrosion resistance of the conversion coating was significantly improved as a result of the AC passivation.
出处
《中国腐蚀与防护学报》
CAS
CSCD
北大核心
2010年第5期341-346,共6页
Journal of Chinese Society For Corrosion and Protection
基金
国家自然科学基金项目(50601007)资助
关键词
AZ91D镁合金
EIS
载波钝化
转化膜
耐蚀性
magnesium alloy
electrochemical impedance spectroscopy
alternating current modulated passivation
conversion coating
corrosion resistance
