摘要
从工艺矿物学的角度分析了某含银多金属锰矿实现锰、银分离的难点,参照类似性质矿石的处理工艺,并结合研究对象的性质特点,指出其合适的开发利用工艺为干式筛分分级—粗粒干式强磁选—细粒湿式强磁选—混合精矿湿法冶金浸出。通过实验室试验,最终获得锰品位31.59%、银品位657.9g/t、铁品位11.72%,锰回收率90.24%、银回收率91.29%、铁回收率78.51%的混合精矿,为大规模、高效率、低成本开发利用该矿石奠定了基础。
Abstract The paper analyzed the difficulties in separation of Manganese and Silver for a silver-bearing multi-metal manganese ore from the angle of process mineralogy. With a reference to the process mineralogy study of similar ores,and combining with the nature of this ore,one suitable process is proposed,which consists of dry screening classification-dry coarse high intensity magnetic separation-wet fine high intensity magnetic separation-mixed concentrate wet leaching.Through the laboratory tests,a mixed concentrate grading at 31.59% of manganese,657.9g/t of silver,11.72% of iron with a Mn recovery of 90.24%,Ag recovery of 91.29%,Fe recovery of 78.51% were achieved respectively.This process provides a basis for large scale,high-efficiency and low cost production of similar ores.
出处
《金属矿山》
CAS
北大核心
2010年第10期72-74,共3页
Metal Mine
基金
中国地质调查局项目(编号:1212010816038)
关键词
银锰多金属锰矿
富集
分级
强磁选
Ag-Mn multi-metal manganese ore
Enrichment
Classification
High intensity magnetic separation